I'm sorry, even though i live on the bother of germany my german sucks! haha, i wouldnt make sense. I'll try and explain in easier words :)
So i bought a 0.070 string, but it wouldn't fit through the tuner. I drilled the hole with a slightly bigger drillhead, so that the string could fit through the tuner.
Then the nut, the little piece between the tuners and the fretboard where all the strings are in. http://www.acguitar.com/media_files/articles/180/7643/7643-001.jpg
The slot width (as shown in the picture) was too small. So i layed the 0.070 on the 7th slot, and went back and forth. Because the string is wound, it slowly cuts away a bit of the slot. Do this slowly, as you dont want to go too far, this will cause fret buzz when you hit the open string.
I hope this helps? If not ill try with more pictures :P good luck
So i bought a 0.070 string, but it wouldn't fit through the tuner. I drilled the hole with a slightly bigger drillhead, so that the string could fit through the tuner.
Then the nut, the little piece between the tuners and the fretboard where all the strings are in. http://www.acguitar.com/media_files/articles/180/7643/7643-001.jpg
The slot width (as shown in the picture) was too small. So i layed the 0.070 on the 7th slot, and went back and forth. Because the string is wound, it slowly cuts away a bit of the slot. Do this slowly, as you dont want to go too far, this will cause fret buzz when you hit the open string.
I hope this helps? If not ill try with more pictures :P good luck
