Search results

  1. N

    Using DAW OUTPUT as MIC INPUT for streaming/gaming/skype etc.

    So I have finally figured it out. After numerous hours, I've found a method that works for me. For anyone interested, I will detail it below. 1. Download and install ASIO4ALL: http://www.asio4all.org/downloads_11/ASIO4ALL_2_14_English.exe 2. Download and install ASIO bridge...
  2. N

    Using DAW OUTPUT as MIC INPUT for streaming/gaming/skype etc.

    I don't think I can make use of "direct sound" since I am using an audio interface. Is there not a way for me to have ASIO sent to the virtual cable?
  3. N

    Using DAW OUTPUT as MIC INPUT for streaming/gaming/skype etc.

  4. N

    Using DAW OUTPUT as MIC INPUT for streaming/gaming/skype etc.

    I will give this a try
  5. N

    Using DAW OUTPUT as MIC INPUT for streaming/gaming/skype etc.

    I have installed virtual cable, and it shows up on my windows sound > recording/playback. But I am not sure exactly how to configure it, or send the daw output to it. Can anyone help with this?
  6. N

    Using DAW OUTPUT as MIC INPUT for streaming/gaming/skype etc.

    Hey guys, I use Reaper to EQ, gate and compress my microphone audio. I would like to use this processed output as an input for things such as: Zoom calls Game chat streaming skype Discord TeamSpeak My setup: Shure SM57 microphone M-Audio c400 interface Windows 10 PC Reaper DAW REAPER...
  7. N

    44khz to 48khz Sample Rate Change

    Yes that was the problem. Tried to change it while the session was open. Stupid problem but thanks so much for the help ! Problem solved
  8. N

    44khz to 48khz Sample Rate Change

    I go to the fast track c400 control panel and when i try to change the sample rate the drop down menu is greyed out.
  9. N

    44khz to 48khz Sample Rate Change

    Hi everyone I am trying to create sessions with the sample rate of 48khz as that is the sample rate they use at work. I used to use 44khz. When i try to create a session with 48khz sample rate, i get an error message saying the playback engine does not support a sample rate of 48khz. How do...
  10. N

    Guitar rig 5 and Pro Tools 12

    Hey guys. I recently upgraded to PT12. I use GR5 for all my sounds that I record. The standalone version works perfectly fine. However, when I open PT12 and look for the plugin insert, it just simply isn't there. All the other plugins are there, but Guitar Rig 5 is missing. I looked under...
  11. N

    VOCAL Mixing - Reverb, delay, EQ and compression

    Hey guys. I have a few questions regarding clean vocal lead mixing. I will state my approach and grievances in each section. Please give me your approach or what I can do to improve mine. 1. EQ - I start with a HPF around 100HZ, small cut around 1K (depends on the performance) and then a...
  12. N

    Kontakt 5 tracks sent to dedicated mix tracks in a DAW

    Hi everyone. I have been using Kontakt 5 as a drum sampler. To save processing power, I load all the samples into one instance of Kontakt 5 into 1 track This would be: Track1 - Drums - 1 instance of kontakt 5 plugin - then a couple of samples. I would like to send each sample to a...
  13. N

    Steven Slate Drums - Making programmed drums sound real

    Hey guys. I recently bought Steven Slate Drums Platinum. I really love the sounds. This is going to make drum programming much easier. My question is the following: 1) What exactly does the 'variances' option under 'settings' do? 2) Generally, what should I set the minimum velocity to...
  14. N

    Feedback on Heavy Metal Mix. Is it a good/bad mix and a good/cliche song?

    Thanks for all the feedback. Really helping a lot. Just to clarify, is the main problem with the snare and the cymbals? the dynamics/tone/EQ of them? is the rest fine, like the guitar and the bass?
  15. N

    Feedback on Heavy Metal Mix. Is it a good/bad mix and a good/cliche song?

    How would I go about fixing this? I use guitar rig 5 for the guitars, so should I turn up treb and presence? or EQ boost? Should I be using a HP filter to remove the muffling sound of the track?
  16. N

    Feedback on Heavy Metal Mix. Is it a good/bad mix and a good/cliche song?

    Hey everyone. https://soundcloud.com/randulf-jim/illusions-in-the-tomb Just finished up recording the first track of my band's Debut Album (Vocals will be added in later). I want to make sure of a few things before I record the rest of the album as to not waste time or sacrifice quality. This...
  17. N

    Can't hear anything that is panned Right

    Heres the flow: 2 speakers, running into the line output 1 in the m-audio fast track c400 C400 then connected to my pc. Listening with the headphones works L and R. its only the speakers into any of the line outputs that only makes 1 speaker play and not the other. In the c400 control...
  18. N

    Can't hear anything that is panned Right

    I can hear the L and R channels on my headphones, and in the C400 control panel, I can see that Audio is playing L and R. However, through my speakers, I can only hear the left speaker when they are plugged into my M-audio C400 in any of the line outputs. BUT, when I plug those speakers...
  19. N

    Can't hear anything that is panned Right

    Hey everyone. I want to cry blood. This problem is so frustrating and makes mixing a total nightmare. If I pan a track 100% Left, I can hear it through BOTH speakers. WHY? and then when I pan a track 100% to the Right, I don't hear anything from EITHER of the speakers. Drivers and everything...
  20. N

    Centered mono instead of stereo

    I used to plug my speakers directly into my pc, and would receive a stereo sound. L and R. However, I plugged my speakers into the line output of my m-Audio Fast Track C400, and both speakers play the same thing. Both speakers act as one R speaker. Basically if I playback a song which has...


Latest posts

Top