xeL
Well-Known Member
After toying with the idea of having a custom built for the past few months I have decided to go ahead and jump straight in there due to the very very slim chance that a production guitar would be made with the same specifications.
The custom will be a doublecut in the vein of a PRS CU24 albeit with options that wont cost me several limbs as they would from the private stock team, the 2 areas that I am having trouble deciding on are the wood selection (bar neck/fretboard) and finish; my near final specs are as follows:
Options highlighted red are those that are not finalised.
Body Shape: Double Cut
Body Wood: Mahogany
Top Wood: Quilted Maple
Body Color/Finish:
Body Binding:
Bridge Type: HipShot String Thru Body (Black)
Pickup Configuration: Humbucker Bridge, Single Coil Neck
Control Layout: Volume, 3 Way Switch, ?
Headstock Style: Double Cut
Neck Material: Maple (Birdseye if available)
Neck Finish: Oiled/Natural
Head Stock Finish:
Neck Construction: Set Neck
Scale Length: 27"
Fretboard: Ebony
Fretboard Inlay: Side dots only
Fretboard Radius: 12"
Frets: 24 Medium Frets
Nut Type: Graphtech Graphite
Nut Width: 42mm
Tuners: Hipshot Grip-Lock Locking (Black)
Mahogany/Quilted Maple is included in the specs as it is the usual go to combination although as said before It is not an option that I am totally set on, originally I was toying with the idea of a Swamp Ash body and Walnut Top however yet again I was unsure, the finish would depend on what wood combination was chosen.
Another lesser decision is the control layout where I know for a fact that there will be a Volume and 3 way switch but a 3rd option eludes me, a second 3 way wired as a kill switch (middle kills and up/down restores) may be useful at times but it may just become a gimmick after a while and I have never really been one to use the tone knob; I would prefer to have the standard 3 bevelled controls for aesthetic purposes as seen on most PRS'.
Any advice would be appreciated![Metal :metal: :metal:](http://www.sevenstring.org/styles/default/xenforo/smilies/hookem.gif)
The custom will be a doublecut in the vein of a PRS CU24 albeit with options that wont cost me several limbs as they would from the private stock team, the 2 areas that I am having trouble deciding on are the wood selection (bar neck/fretboard) and finish; my near final specs are as follows:
Options highlighted red are those that are not finalised.
Body Shape: Double Cut
Body Wood: Mahogany
Top Wood: Quilted Maple
Body Color/Finish:
Body Binding:
Bridge Type: HipShot String Thru Body (Black)
Pickup Configuration: Humbucker Bridge, Single Coil Neck
Control Layout: Volume, 3 Way Switch, ?
Headstock Style: Double Cut
Neck Material: Maple (Birdseye if available)
Neck Finish: Oiled/Natural
Head Stock Finish:
Neck Construction: Set Neck
Scale Length: 27"
Fretboard: Ebony
Fretboard Inlay: Side dots only
Fretboard Radius: 12"
Frets: 24 Medium Frets
Nut Type: Graphtech Graphite
Nut Width: 42mm
Tuners: Hipshot Grip-Lock Locking (Black)
Mahogany/Quilted Maple is included in the specs as it is the usual go to combination although as said before It is not an option that I am totally set on, originally I was toying with the idea of a Swamp Ash body and Walnut Top however yet again I was unsure, the finish would depend on what wood combination was chosen.
Another lesser decision is the control layout where I know for a fact that there will be a Volume and 3 way switch but a 3rd option eludes me, a second 3 way wired as a kill switch (middle kills and up/down restores) may be useful at times but it may just become a gimmick after a while and I have never really been one to use the tone knob; I would prefer to have the standard 3 bevelled controls for aesthetic purposes as seen on most PRS'.
Any advice would be appreciated
![Metal :metal: :metal:](http://www.sevenstring.org/styles/default/xenforo/smilies/hookem.gif)