Belated NGD: Something Old and "Eerie"

  • Thread starter groverj3
  • Start date
  • This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.

This site may earn a commission from merchant links like Ebay, Amazon, and others.

Rubbishplayer

Well-Known Member
Joined
Apr 13, 2014
Messages
158
Reaction score
169
Location
London
I always wanted a Jackson in their Eerie Dess Swirl finish, and I saw an old DK2 on Reverb for a reasonable price and jumped at it.

It was looking kind of sad:



Dry fretboard, broken pickup ring, some oxidation on the frets. However, these are a fantastic modding platform. It got the full refurb treatment:

- EMG 81X + 2x SX
- Full solderless wiring
- Relocate volume control to tone position and fill the extra hole
- Metal low profile pickup ring
- Mostly black hardware (some parts are hard to find, but the black + chrome works)
- 1000 series Floyd
- Stainless steel Floyd Rose bolts
- Titanium string lock blocks
- Push-in arm
- Usual fret polish and fretboard cleaning

After:




Plays great! Set it up in D standard and it rips.

Not so great, there were two headstock breaks (the tip and through the lowest string tuner hole). But they appear to be well-repaired so I'm not going to complain too much. However, sometimes when you rescue something old there are surprises.

Some surprises are good though. Basically zero fret wear on this.

My biggest problem: now with 9 guitars I have run out of guitar stand space. I told my wife I'd sell one, but sssshhhhh I don't think I will.
Wall hangers. My wife's favourite guitars hang in living space, while anorher 8 are hung in the office and a spare bedroom. Thus I get away with having 27 guitars in the house (plus four under construction).
 

IbanezDaemon

Raptus regaliter
Joined
Apr 2, 2009
Messages
4,415
Reaction score
8,529
Location
UK
Great work! Always loved the EDS finish. I have a Kelly with the same. Looking for one of the Crimson Swirl one's but no luck at the minute.
 
Top
')