Cheap Ukrainian project

[turenkodenis]

I decided to tell everyone about my project built guitar. Not strictly judge, as the main task was cheapness.
That's what is:

That's about what i should get:

In general the whole process will gradually spread and waiting for your advice and suggestions)) Please accept my apologies for my english.

 

[Devotion]

May i ask why that neck-humbucker (i assume?) is actually rotated a bit? As it looks now, it looks like its overlapping the neck.
Nice detailed plans though, me likes! Are you an engineer?
Also, could you specify what pups etc you gonna use?
Looking forward for the first update ^^

 

[turenkodenis]

Here are the future spacs

Neck-Thru-Body Construction
27" Scale
dont know what kind of wood on body and neck
27 Frets
EMG 81 in bridge position (maybe something else)
Master Volume
Finish: natural (maybe)

 

[Devotion]

Here are the future spacs

Neck-Thru-Body Construction
27" Scale
dont know what kind of wood on body and neck
27 Frets
EMG 81 in bridge position (maybe something else)
Master Volume
Finish: natural (maybe)

Ah and the neck pickup? and its placement issue (could be my opinion)
Also, are you an engineer? Your plans make me think that (that's a good thing btw )

 

[buffa d]

That headstock looks nice

 

[BlackMastodon]

May i ask why that neck-humbucker (i assume?) is actually rotated a bit? As it looks now, it looks like its overlapping the neck.
Nice detailed plans though, me likes! Are you an engineer?
Also, could you specify what pups etc you gonna use?
Looking forward for the first update ^^

It's not overlapping, the neck just has 27 frets on the low end, so it's cut on an angle and the humbucker rests against it.

 

[Devotion]

It's not overlapping, the neck just has 27 frets on the low end, so it's cut on an angle and the humbucker rests against it.

Sweet

 

[turenkodenis]

Thenks for coments guys))
In neсk there will be no pick-up, due to the fact that the costs should be minimal.
As for drawing, I'm glad that you liked, and frankly it was my first experience in CorelDraw x5 .
Devotion, no I'm not an engineer)) but thanks for the nice words.
EMG-81 I'll use only because of the fact that I can get it from my LTD-1000. In what certainly is something else I can deliver.
The first phase - leveling, grinding, etc. 3 pieces of neck. A little later, many detailed picture.

 

[Devotion]

Sweet, good drawings then!! Keep it up!

 

[Thep]

Looks like it will be a cool build! Good luck!

 

[Sebastian]

Looks like a cool project Nice design!

And a really cool carpet

 

[turenkodenis]

Sebastian, this are Polish carpets

 

[apiss]

The plans indeed look very good!

All the best, man! May the end product comes out anything but cheap!

 

[turenkodenis]

So here we go.... gluing the neck...

wood parts

some tools

very smelly glue

adhesive. And the piece of wood becomes more beautiful

At the same time decided to glue the old chair

Clamps are not enough, so just glue and two pieces of which will make headstock.


and the result

What do you think about? Waiting for comments!

In addition, the ordered wood for fingerboard
http://guitarwood.ru/published/publ...oducts_pictures/клен гриф копияe9_enl_enl.jpg

first cash expenditures amounted to $ 20

 

[osama]

In addition, the ordered wood for fingerboard
http://guitarwood.ru/published/publ...oducts_pictures/клен гриф копияe9_enl_enl.jpg
first cash expenditures amounted to $ 20

Perhaps this is the best shop in the CIS. I regularly buy wood here.

 

[turenkodenis]

Sorry that it took so long to update the post

Next step:
glue the head with the neck at an angle of 15 degrees (or will)

begin with, saw off the unnecessary parts

Frankly hacksaw is very uncomfortable, and curves. In the next time something else will use. As you can see from the photos, cut turned out not flat and certainly not 15 degrees.

a small sketch of the contour of the head and my friend's Schecter

gradually begins to resemble the design of the head Shetster's one

that's what happened. One of these days we will glue it.

Waiting for comments. 'm Really interested in your opinion

 

[turenkodenis]

I also want to know your opinion about the design.
Vote

and a headstock

 

[Stealthdjentstic]

I like it.

 

[jay133]

1-st body and 2-nd headstock.

 

[Isan]

1 and 2