General Specs:
~7 string
~26.5" scale
~Neck-Through Body
~No pick guard, electronic access in back of the guitar, mahogany cover plate, electronic cavity in lower horn behind bridge.
~oil and wax finish on the whole guitar.
Neck Specs:
~Agile intrepid 4+3 headstock
~20" radius fretboard
~5 piece maple/wenge/royal white ebony/wenge/maple neck
~Graphite nut
~24 frets
~Ebony fretboard
~Dunlop 6105 frets
~No fretboard inlays, fret markers on side of the fretboard
~"Ibanez wizard" shape/profile back of neck
~Width of the neck at the 1st fret: 19mm
~Width of the neck at the 12th fret: 21mm
~Width of the neck at the 24th fret: 58mm
~Mahogany truss-rod cover
Body Specs:
~Mahogany body, or "wings", whichever you prefer
~Body shape: (see pictures attached)
Electronics:
~Seymour Duncan 7 string Nazgul at bridge, 7 string sentient at neck
~1 master volume (gold), 3 way toggle (gold)
~Output jack located on the upper side of the lower wing, recessed like a Strat jack using the same angled jack, like the output jack of a Jackson King V. Once again: gold colored
Hardware:
~Schaller strap locks (gold)
~Hipshot 7 string fixed bridge (gold)
~Schaller locking tuners (gold)
~mahogany pickup rings
~gold colored screws
~any other hardware that can be gold, ill have gold, i love how it looks with the woods
The pictures do not give the wood combo justice, however this is the inspiration: http://www.sevenstring.org/forum/lu...zations/145584-nordic-8-string-completed.html
however i am using my own design body, inspired from the dean ml which is my favorite guitar body design of all time.
Also i wish to note that the edges are smoothly beveled when transitioning from sides to front or back, and there are multiple cutaways for comfort and the transition can be seen in again this link: http://www.sevenstring.org/forum/lu...zations/145584-nordic-8-string-completed.html
Overall thoughts? (btw i dont draw. so i recognize the sketch is fairly awful)
~7 string
~26.5" scale
~Neck-Through Body
~No pick guard, electronic access in back of the guitar, mahogany cover plate, electronic cavity in lower horn behind bridge.
~oil and wax finish on the whole guitar.
Neck Specs:
~Agile intrepid 4+3 headstock
~20" radius fretboard
~5 piece maple/wenge/royal white ebony/wenge/maple neck
~Graphite nut
~24 frets
~Ebony fretboard
~Dunlop 6105 frets
~No fretboard inlays, fret markers on side of the fretboard
~"Ibanez wizard" shape/profile back of neck
~Width of the neck at the 1st fret: 19mm
~Width of the neck at the 12th fret: 21mm
~Width of the neck at the 24th fret: 58mm
~Mahogany truss-rod cover
Body Specs:
~Mahogany body, or "wings", whichever you prefer
~Body shape: (see pictures attached)
Electronics:
~Seymour Duncan 7 string Nazgul at bridge, 7 string sentient at neck
~1 master volume (gold), 3 way toggle (gold)
~Output jack located on the upper side of the lower wing, recessed like a Strat jack using the same angled jack, like the output jack of a Jackson King V. Once again: gold colored
Hardware:
~Schaller strap locks (gold)
~Hipshot 7 string fixed bridge (gold)
~Schaller locking tuners (gold)
~mahogany pickup rings
~gold colored screws
~any other hardware that can be gold, ill have gold, i love how it looks with the woods
The pictures do not give the wood combo justice, however this is the inspiration: http://www.sevenstring.org/forum/lu...zations/145584-nordic-8-string-completed.html
however i am using my own design body, inspired from the dean ml which is my favorite guitar body design of all time.
Also i wish to note that the edges are smoothly beveled when transitioning from sides to front or back, and there are multiple cutaways for comfort and the transition can be seen in again this link: http://www.sevenstring.org/forum/lu...zations/145584-nordic-8-string-completed.html
Overall thoughts? (btw i dont draw. so i recognize the sketch is fairly awful)