leechmasterargentina
Leandro
Leech master, that tone is really sick but it's a bit too loud in the mix in my opinion. But that's the sound guy not you.![]()
Thanks!
Leech master, that tone is really sick but it's a bit too loud in the mix in my opinion. But that's the sound guy not you.![]()
This site may earn a commission from merchant links like Ebay, Amazon, and others.
This is one of the videos from my band's show; leaving stage with this Sepultura cover song. Sound was recorded from the mixing board. Before this show, I made a lot of questions here on how to improve the hard gate on high gain patches. Here's the result. I must admit it didn't work as I expected, so as you can hear during the video, mostly where I stop playing, speak or whatever, feedback gets loose sometimes, with a flickering sound. Maybe guitar coming out from the front monitor makes feedback to come in. When I tested it at home, it seemed it would work fine. Maybe next time I should ask the sound man not to send guitars over the monitor, but I was afraid I wouldn't hear it in this big open place.
No more words, the video:
You absolutely MUST turn hardware monitoring all the way down in the line6 audio devices menu. You also can't activate the monitor function on your daw. Essentially, you won't be able to hear what your reamping. There's no way to get around the feedback. It's like putting your phone too close to the speaker when you've won tickets on the radio and are on the air...
It's an endless cycle of your signal being ran into your pod, then out of your pod, into your pod, then out of your pod, then into your pod.... I think you get the idea.
pre-noob level question, and my apologies if this has already been asked/answered, but i'm thinking of getting a pod hd500 floorboard and was wondering if it could run through my 5150 III? i know some line 6 products are line 6 exclusive, so i wanna make sure i can even use it before dropping the money.
Some people are gonna be confused by your sig.
Do you guys have any suggestions for getting an Opeth distorted sound? Ghost Reveries era, just something in the ball park.
If one more person asks "can I hook my pod up to X amp" I think I'm going to shoot myself. It's been asked more than 50 times in the last 100 pages of this thread.
As long as at least a couple people don't ask again!
I've never really listened to opeth, so I can't be of any help there.
Do an acacia strain patch! either "the dead walk" or "death is the only mortal" would be awesome.
Nice man! What amp/cab/mic sims are you using for that tone?
Some people are gonna be confused by your sig.
Do you guys have any suggestions for getting an Opeth distorted sound? Ghost Reveries era, just something in the ball park.
Ricky, your Sevendust patch is really really good! If I had to make a request I'd be stoked if someone could do a Deftones patch. The Angel F-ball seems like it could deliver a Stephen Carpenter tone, but I just cant quiet get it right...
going to re-amp these tracks in a few days Rick with your periphery patch - https://soundcloud.com/d-i-m-3. these at the moment are using amplitude + tri-axis but the pod + tri-axis should sound pretty awesome i reckon