JJ Rodriguez
Contributor
- Joined
- Aug 16, 2005
- Messages
- 14,733
- Reaction score
- 1,355
Your drummer invested in a TD-12 brain just for his kicks? Damn, that's a shit load of money just for kicks.
This site may earn a commission from merchant links like Ebay, Amazon, and others.
okay bitches, i'm here.
option 1: do what all broke-ass touring national metal bands do (minus the minority wealthy like metallica): don't worry about renting/buying a high-end kit until you're ready to record, and just trigger a shitty sounding kit for live use, that you dont mind getting dinged up.
Btw, I hate triggers.
here are some random rambles:
-The deeper the shell, the louder the drum.
-The deeper the shell, the slower the drum will reach peak volume.
-The larger the diameter, the lower the pitch
-The lower the pitch, the harder it is for the sound to project and carry - then you have to hit really really hard, which is tough if youre playing really really fast (so trigger like a cheater)
-Overall bigger shells limit drum positioning (look how Lombardo has to angle his shells because of their size, and his lack of size - Lars old white tama kit is another example).
-double ply heads - more durable, slightly fatter sound, slightly lower pitch. Good for metal drumming since you can tune them up for good stick response, but have the sonic qualities I just mentioned. A little more attack too, since the slower and shorter resonance cuts out the higher overtones, revealing the lower undertones.
-single ply heads - a little louder . And mostly the opposite of what I stated about double ply heads. The higher overtones are uninhibited, so youll have to muffle them a little more if you want a short and fat sound and attack.
Check out guys like Dave Lombardo and Paul Bostaph. No triggers, and monster sized shells. They play fast. They get over the slower sounding and less projecting of their monster sized shells buy tuning higher. Higher head tension = more rebound, and a higher pitch that projects and cuts better. Nick Barker plays dinky 20 kicks but hes a trigger whore. He sounds (and looks) like Godzilla behind the kit b/c hes basically playing an electronic drumkit.
Then, theres wood variables. They arent as big a deal to me, since the differences you can notice between woods are hard to hear in a live situation. They are easy to overcome with head selection, top/bottom head tuning combos, bearing edge shape, shell diameter & depth, and a deaf soundman. But, the general rule is: Birch - fast sound, a little sharper, and I think maybe more higher overtones. Maple - warmer and more of a bassy thud. Slower to sound and open up maybe fatter, etc. Dont buy the current hype that maple is the way to go. A couple of decades ago, the praise was in birch anyway. And arguably, the best drum sounds ever recorded were from that long-gone era with older and outdated drum construction and recording technology. So, fuck all the hype. If you ask me, a high-end kit is so because its versatile in the sounds it can achieve.
My route - I bought a Premier GenX. Layers of maple plies sandwiched between layers of Birch. Or maybe it was the other way around. Regardless, I just went the middle ground - and in my sizes too. I went for versatility b/c I knew at the time of the purchase that I would keep the kit for a long time - long enough for me to change bands and genres.
Another factor: tuning for recording vs tuning for live sound. Metal sounding drums have the low pounding thunder of a pitch and tone. Youll hear this on a recording. Live, you wont hear shit. Itll be like a tube-amp modeler. So, worry about metal sounding kits when it comes to recording. I made the mistake for a couple shows, early on in Division, where I tuned really low, going for that fat-assed thump. First song hits (11th Hour) that features many rolls on the toms. I hear my snare, and when I hit the toms, everything disappears. Talking about a sinking feeling 2 bars into the night! Worse yet, the stage lights then proceeded to warm my kit up, expanding the heads and further dropping their pitch. They were loose enough to jump off my shells and walk to the bar. They might as well have, since nobody else heard them for the rest of the night. I now tune in anticipation of pitch-dropping as the night progresses and the stagelights cook my kit.
If you want a metal sounding kit, just get a versatile kit and be smart about how you tune it. Metal is in how you play anyway . You can put Jack DeJohnette on Vinnie Pauls kit and I bet he sounds like a jazz guy playing a standard drumset. I play 2 different crap kits at rehearsal and I think I make them sound metal.
If your fortunate to have a house PA with close micd drums, then that can help them sound huge. We opened for Into Eternity last year. Their drummer played a POS kit that, when the front-of-house sound kicked in the PAs it sounded bigger than I expected it too and he wasnt a basher either. Of course you dont want to be dependent on mics since you wont always have them, and since theres always the chance for technical difficulties . Another reason why I dont like triggers btw.
The shared kit at the ProgPower festival last year was a Pacific kit. Thats DWs entry level kit. It sounded massive b/c who ever set it up knew how to tune it, and the venue had great sound.
Bah, Im totally rambling. Sorry - its late
Any mid-line kit will do fine for metal. Just get double ply heads, tune higher than you think you need, and dont hit like a girl.
If I were to buy a new kit, I wouldnt upgrade over my Gen-X. Id go along the same route - replace it with a higher mid-line kit. It sounds metal, but it doesnt look it b/c of its glitter gray finish.
![]()
Actually, my number 1 concern is durability; especially in the hardware. Then I consider sound and knowing that most midline kits can sound awesome with making the right tuning decisions, this usually isnt even a problem. Ive heard mega metal looking kits sound like dogfarts (st anger anybody?)
DDrum has some lower priced kits.. their newer in the acoustic drum market. Ive seen their stuff at GC lately, and have been really impressed with their sound vs cost and they look great too. Drover, of Megadeth, recently picked up a DDrum endorsement. Why he dropped Pearl for DDrum is beyond me maybe deans parent company owns them but now Im just making stuff up.
oh, i forgot to mention - another reason why i tune higher for live shows is because we're a sevenstring band. i dont' want to compete for the same frequencies as Dave/Mike/Ron by producing inaudible muddy bitch farts. i want to cut through these guys without interfering with them. it's back to that argument of modeling amps verse real live-worthy tube amps. it's tonal presences vs what sounds good solo in a bedroom recording studio.
shit, another thing.... a lot of the metal sound is going to come from your snare and ride cymbal as well. thse, with the kicks, will literally receive the most beatings. Pearl's aluminum UltraCast snare is one of the best bang-for-your bucks out there... and it's not budget gear either. A heavy ride is one that can match the rest of the kit in volume... especially loudassed chinas. smart drummers select cymbals with balance in mind. loudass high hats will make the guitarists turn their rigs up too loud (so get sweet sounding musical ones - trust me, they'll still be heard, big time). loud ass chinas will make your crashes inaudible. a wimpy ride will sound like the sound is dropping out when you go from riding the hats to riding the ride. Ziljdian A Custom crashes from 17" to 18" are fast in sound, a medium decay and volume, and some of the most musical and versatile crashes out there. Totally underated for rock and metal... everybody thinks their for cotempory pop rock like Dave Mathews Band or something. IMO Paiste makes the cleanest non-gongy rides out there... but this is TOTALLY subjective. Chinas are always ugly, no matter the brand or the price. In other words - it's very subjective. i like Igor's china sounds in Chaos AD (zildjian oriental trashes), so that's what I bought. it's like a "cawwww" sound. Van Williams - his China sounds in the opening moments of the Final Product in This Godless Endeavor is pretty cool... it sounds like a stadium of people clapping their hands in quarter note time.... Then there's the "cahhh" sound of zidjian china boys... and the weird cymbal sounds of Death's 'the sound of perserverance" (richard christy). point is...... chinas are personal... but every metal kit needs chinas!!!!!!!!!!!!!!!!!
Your drummer invested in a TD-12 brain just for his kicks? Damn, that's a shit load of money just for kicks.
Sounds like it's not the kit so much as it is his abilities to TUNE his drums.Mostly its just the flabby bass drum, but the toms are pretty weak too. The snare is good though. What would you guys recommend as far as a metal sounding drum kit goes?