The difference in tension from 24.75" and 25.5" is minuscule.
By using a set just a tiny bit heavier (and a stock set at that) you can easily compensate for the less than 3% difference in scale.
len 25.5"
E .009" PL == 13.13#
B, .011" PL == 11.01#
G, .016" NW == 12.46#
D, .024" NW == 15.77#
A,, .032" NW == 15.77#
E,, .042" NW == 14.77#
B,,, .054" NW == 13.57#
total == 96.48#
len 24.75"
E .009" PL == 12.37#
B, .011" PL == 10.37#
G, .016" NW == 11.73#
D, .024" NW == 14.86#
A,, .032" NW == 14.86#
E,, .042" NW == 13.91#
B,,, .054" NW == 12.79#
total == 90.89#
len 24.75"
E .010" PL == 15.28#
B, .013" PL == 14.49#
G, .017" NW == 13.47#
D, .026" NW == 17.34#
A,, .036" NW == 18.4#
E,, .046" NW == 16.47#
B,,, .059" NW == 15.53#
total == 110.98#
By using a set just a tiny bit heavier (and a stock set at that) you can easily compensate for the less than 3% difference in scale.