First of all I wanted a natural finish, and since I love my Ibby, it was the perfect candidate. The practical idea behind this was, that a coating as thick the one that Ibanez applies would sort trap the natural vibration of the wood in a "box" so to speak. At first I was somewhat worried about the quality of wood used for this body. But it turned out it was ok. Oddly there is a paper thin sheet of wood on the bottom of the body. But now some insight on the work done. At first I tried all sorts of paint etc removers. None of them seemed to do little more than scratch the surface. So I resorted to a heat gun and a scraper/chisel. Got the body stripped in about 30min. Then some sanding followed. For the top I used a sheet of karelian birch. Then It was a matter of trimming the edges and doing some more sanding. After that some nice coats of clear followed. Was it worth the hassle? HELL YEAH!!! Just look at this beauty! And now the resonance of the wood is considerably more present.
Actually got it free of charge from a friend of mine who runs a furniture repair shop. It was my luck, cause the shops ask for insane amounts cash for rare woods, and they only sell them in large quantities.