This site may earn a commission from merchant links like Ebay, Amazon, and others.
Wow, that sucks to hear. MY RG 7321 and the RG8 were new, and fine out of the box. I actually didnt need to adjust the truss rod with the 10-74's I put on but everything looked fine when i popped the truss rod cover. It did have fret buzz out of the box bad and the action was pretty high but oddly the 74's play way better, no fret buzz and NO adjustments, truss rod, action, or setting intonation needed to be adjusted after the thicker strings
I don't know what the manual said for my rg8 (in fact I don't remember getting one), but my truss rod adjustments are the same as every other guitar I've had... Lefty-loosey, righty-tighty. I guess maybe they changed truss rods at some point?
My m80m was lefty tighty, righty loosey, but you just never know. If it's still under warranty take it back to the your place of purchase.
M80M owner here, and the manual is opposite to how it should be adjusted.
Maybe just a bad string of luck? Like I said, I have not had any problems with either of them, though Ive notice after a day of adding the last 4 strings ( I changed just the first 4 when I restrung it and left the last 4 stock strings) that fret buzz is back. Im going to take it to my uncles house and have him check it over and maybe adjust the truss rod. I think maybe i should have just left the last 4 on, it felt a tad bit better with the 9's on. Overall they played nice and felt great. I havent been able to put the 8 down since I got it. I havent even looked at a 6 string since.All of my Ibanez guitars have been new, all have played terribly out of the box and required quite a bit of set up, aside from my second RG8 which wasn't great but a lot better than previous Ibanez guitars.
Maybe Ibanez just aren't for me?![]()
I'm starting to noticed some *issues* with mine. I did some to-the-right adjustments to straighten the neck out since the relief was quiet high; seemed to do the job. I stoked the bridge and such and it seemed good.
Two weeks later after it's been sitting on a stand, the action has crept up and I'm noticing a ton more fret-buzz and some dead spots on the upper frets. Not so happy. Maybe it just needs setting up by a luthier or something? I can't seem to get the action down any further without causing unplayable fret buzz...
Any thoughts?
Maybe just a bad string of luck? Like I said, I have not had any problems with either of them, though Ive notice after a day of adding the last 4 strings ( I changed just the first 4 when I restrung it and left the last 4 stock strings) that fret buzz is back. Im going to take it to my uncles house and have him check it over and maybe adjust the truss rod. I think maybe i should have just left the last 4 on, it felt a tad bit better with the 9's on. Overall they played nice and felt great. I havent been able to put the 8 down since I got it. I havent even looked at a 6 string since.
My RGD2127FX was listed incorrectly as well - I had to turn it opposite to the way listed in the manual. I actually took a photo of the page when I discovered it but never got round to doing anything with it (It's a huge photo so I didn't embed it):
Imgur
Nope, havent had it adjusted yet. It sits in a closet which is cold, so I think thats what the deal is. She plays great, just had her out last night though. I still need to take it over to my uncles house and have him look at it, but i looked at the neck the other day and it looks like its fine. I have only owned the RG8, and 2 RG7321's, and yes, I do love these guitars!! One is new and for sale, other one i play and I havent had any problems with the 7 at all. The new one seems fine as well. Overall, not any problems and it scares me to keep reading all the problems others are having. And I paid $240 shipped for the 8, brand newMaybe it is just bad luck, but I can't ignore the fact that I've owned 4 Ibanez guitars, 3 of which were complete lemons and one of which was very poorly put together and QC got lazy
Still, people tend to love Ibanez, there must be a reason.
Did you adjust the truss rod after changing the string gauge? This could be your culprit.