CM_X5
Well-Known Member
Maybe try a needle file and file down where the string sits on the saddle, also push that string down just in front of the saddle to make sure it's not "bowed" as it goes across. Would help a little with intonation too.
This site may earn a commission from merchant links like Ebay, Amazon, and others.
What? Why? I haven't checked the measurements but idk if it's an exact fit. It's not even guaranteed to fix the problemLowkey gotta full send and get the hipshot if you want to keep the guitar
What? Why? I haven't checked the measurements but idk if it's an exact fit. It's not even guaranteed to fix the problemthen I have to order it from the USA. It's so inconvenient..
Someone sent me a contact of a person who works with metal, they might be able to help me thin the bridge by 1mm equally on both sides.
Aw cool, thanks for letting me know! But it's still like 100€. I'll try taking this thing to the metal man and if that doesn't work then I'll have no choice but to buy another bridge. Hoping to fix it though.You can buy one in Spain fyi - 8 string is selectable if you click the fixed bridge thingy.
Bridges - Egilegorbasses shop
egilegorbasses.com
This was my thought, I did this on my first bass when I couldn't get the action as low as I wanted. Hacky, but probably easier to achieve with hand tools than grinding the base plate downMaybe try a needle file and file down where the string sits on the saddle, also push that string down just in front of the saddle to make sure it's not "bowed" as it goes across. Would help a little with intonation too
This was my thought, I did this on my first bass when I couldn't get the action as low as I wanted. Hacky, but probably easier to achieve with hand tools than grinding the base plate down
I have those too. But I'm afraid doing this will ruin the files so I'd rather notOhhh I've done this with a diamond coated nut slot file before and it worked!
I'd be willing to do it if it was a normal file, but from what I've read you have to be careful with diamond coated stuff. I saw a guy on Reddit who said he ruined his Music Nomad S file (120€ file in EU) by crowning one single neck with stainless steel frets, so I'd rather be careful.I respect the thriftyness
Sorry, I was just doing some blatant consumerism and encouraging you to buy something.What? Why? I haven't checked the measurements but idk if it's an exact fit. It's not even guaranteed to fix the problemthen I have to order it from the USA. It's so inconvenient..
Someone sent me a contact of a person who works with metal, they might be able to help me thin the bridge by 1mm equally on both sides.
Other than doing it yourself, are there any machinists near you?
The nut is mostly fine. Actually I got nut files and feeler gauges for nut stuff so I checked all my guitars. The nut isn't the problem here.I'm assuming you looked at this already, but just in case - are you sure it's a bridge issue and not a nut issue? How high is the string above the first fret? Fret the third fret - there should be barely any light showing between the string and the first fret.