DistinguishedPapyrus
Well-Known Member
- Joined
- Oct 1, 2012
- Messages
- 1,211
- Reaction score
- 444
Cheers guys. Another stupid question (forgive me, first time dealing with a string through)
I'm trying to drill out the ferules on the rear of the guitar, because there is already a small string hole, the mahogany just tears. I can do a practise hole on the same timber cleanly, but when drilling into a pre drilled hole, it tears.
Anyone have a solution? I'm considering dowling up 5mm or so before drilling..
Heres a good idea (IMO) you could try... Drill a hole through a piece of MDF or scrap the same diameter as the string through holes. position the hole in the scrap exactly over the string through holes (use a dowel or the butt end of the drill bit itself to help you position it accurately) Clamp the scrap down in place, drill through the scrap into the body using the drill bit thats the right size for the ferrules. Make sure to drill to the correct depth. Then unclamp everything, check your work, repeat...
The pressure of the scrap on top should keep the body wood from tearing or flaking.
Sure man. I just use a stewmac binding bit for the router. So simple, so easy.
Cool to see you use the stewmac binding bits... I haven't tried using them yet myself but I wanna buy some for my next build. So you like them? They are good quality and such? Also, did you have to do anything special to prevent tear out when going against the grain?