What boost to pair with 3120?

[Jacksonluvr636]

Had to sell my amp due to poverty reasons and I picked up the Peaverty 3120 because I have to have a half stack to jam out.

I'm happy with the purchase and it's going to work fine for me but now I'm thinking I need a boost. Don't get me wrong I don't think the amp "needs" a boost in the traditional sense, it has all the gain and saturation that I need but maybe to add a little flavor? Not really complaining about the tone from this amp but there is something about the low end that makes me think it could benefit from a little cut as well.

Here's a little clip for context.

 

[maggotspawn]

I had the XXX, and didn't think it needed a boost. An SD-1 works though. Also run the resonance switch on loose.

 

[DECEMBER]

Horizon Devices Precision Drive is perfect for tightening a tube amp. Attack knob adjusts how tight. Bright knob makes it sharper. And the built-in adjustable gate makes it everything you need.

 

[ctgblue]

First, not sure about yours, but the two I had were NOISY AF. A noise gate first. Then a TS style clone with gain down and volume up, just adds some saturation.
I had to sell both of mine, they were sooo noisy, but the gain was great.

 

[DECEMBER]

First, not sure about yours, but the two I had were NOISY AF. A noise gate first. Then a TS style clone with gain down and volume up, just adds some saturation.
I had to sell both of mine, they were sooo noisy, but the gain was great.

Precision Drive: a TS-style overdrive with a gate. 'Attack' adjusts how tight. It's the perfect overdrive. Free up the space of a separate gate pedal.

 

[broangiel]

I like the Bosom Boost with mine. Granted, I run the Boost control pretty low and tune the Tight control to taste. I only bring the BMT EQ into the circuit if needed, which isn't usually the case for the 3120.

 

[ctgblue]

Precision Drive: a TS-style overdrive with a gate. 'Attack' adjusts how tight. It's the perfect overdrive. Free up the space of a separate gate pedal.

I used my gate in the loop, because the AMP was so noisy, not the intro chain. I ran straight in because i didn't need more gain, and when you turn the guitar volume down, it sounded like a room full of angry snakes....

 

[DECEMBER]

I used my gate in the loop, because the AMP was so noisy, not the intro chain. I ran straight in because i didn't need more gain, and when you turn the guitar volume down, it sounded like a room full of angry snakes....

Overdrives aren't just for more gain. I get more than enough gain from my amp. The PD is to clean up the low end and sharpen the high end, with a slight mid-boost. With the Attack knob up and gain at 0, it's actually reducing the gain a tad, because the low end isn't being pushed so hard into saturation. I always run overdrive with gain at 0, volume set to unity, just for pre tone shaping.
I get so much noise here, I have the gate in the PD in front, another first in the loop, and another last in the loop. Most of the noise is EM/RF from the pickups, so the gate in the PD cuts that noise before it hits the amp and gets amplified. So the gate in the loop doesn't have to work so hard, its threshold gets to be lower, which allows for longer sustain.

 

[Crazysheriff]

Had to sell my amp due to poverty reasons and I picked up the Peaverty 3120 because I have to have a half stack to jam out.

I'm happy with the purchase and it's going to work fine for me but now I'm thinking I need a boost. Don't get me wrong I don't think the amp "needs" a boost in the traditional sense, it has all the gain and saturation that I need but maybe to add a little flavor? Not really complaining about the tone from this amp but there is something about the low end that makes me think it could benefit from a little cut as well.

Here's a little clip for context.

Great Amp!
I have been on a tone search for the last year or so after a couple of years off do to having kids.
So yeah i had an Engl Retrotube 100 for about 8 years. And i wanted to change it up a bit and continue searching after the most crunch and bottom end i could get.
I went through Peavey 6505, Peavey invective MH, a Mesa Boogie dual caliber 10, and a KSR Ares. And offcourse the Peavey 3120.

First off.. Cab and Speaker just makes a WORLD OF DIFFERENCE!!!!
And also what type of boost you use.


So the amps im left with now is the 3120 and the KSR Ares.

So what made me love the 3120 so much?
I play sevenstring a half step down drop A and went from emgs to passive seymour duncans.
The boost i use is a Zuta Triax, and that thing rocks.. nearly no boost on but it is the filtering it does that makes the amp CHUG!

So yeah a precision drive should work great or something similar, preferrably with a noisegate.
As far as the Speakers And Cab, i run one 412 with greenback 25s and one 412 with v30s together.

The boost and cabs just made the tone go from ok to Really fucking awesome.
This amp is in my opinion very underrated and there is a lot you can do to shape the tone on it.
Dont forget the dampening switch on the back that has 3 settings, loose medium and high.
I played a long while with the settings on loose, but after getting those cabs i now have it on medium.

Had to sell my amp due to poverty reasons and I picked up the Peaverty 3120 because I have to have a half stack to jam out.

I'm happy with the purchase and it's going to work fine for me but now I'm thinking I need a boost. Don't get me wrong I don't think the amp "needs" a boost in the traditional sense, it has all the gain and saturation that I need but maybe to add a little flavor? Not really complaining about the tone from this amp but there is something about the low end that makes me think it could benefit from a little cut as well.

Here's a little clip for context.

Boost and cab/ speaker is what makes this amp shine.
I run mine with a zuta triaxx boost, but a precision drive would work great or something similar with a gate.
Its mostly how the boost filters the signal before the amp. It might not need that much signalboost but it needs toneshaping like the precision drive does. There are clones of that pedal like the joyo argos. I actually ordered one and im going to try it.
I run 2- 412 cabs. One with 25watt greenbacks and one 412 with v30s. And i would say that combo boost/cab was far better then i would have expected.
Crunch for days.
I havent played the peavey 412ms cab but im shure it works with that amp.
Also mess with the dampening switch on the back, used to run it on loose but now i run it on medium.

 

[SJShinn]

I love these amps, I had a Triple XXX 2x12 combo back in the day. Being that the 3120 is the exact same circuit, just with different power tubes, I would give the Boss SD-1 a try. My favorite setup with that amp was an SD-1 in front of the Crunch Channel with the damping switch set to loose. Almost into Exodus-y territory with that. Also remember it's active EQ controls on the gain channels, they gotta be set a little differently to a "normal" amp. Enjoy the 3120! That whole family of amps are fire breathing beasts.

 

[melomanic]

I agree with the Boss SD-1 recommendations, that's what I use with mine to give it more thwomp. These amps are extremely sterile, and the mid hump of the SD-1 does the job wonderfully.