Your dream 7 string?
- Thread starter Brett89
- Start date
This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.
This site may earn a commission from merchant links like Ebay, Amazon, and others.
Body: Mahogany, Gibson Explorer Pro or Jackson King V shape
Neck: Maple, same profile as RG7620, bolt-on with AANJ
Fretboard: Maple, gloss lacquer, black dots
Bridge: Tune-o-matic, piezo
Pickups: H/H, D-Activators
Finish: Either alpine white with black binding or laser blue with white binding, matching headstock
Neck: Maple, same profile as RG7620, bolt-on with AANJ
Fretboard: Maple, gloss lacquer, black dots
Bridge: Tune-o-matic, piezo
Pickups: H/H, D-Activators
Finish: Either alpine white with black binding or laser blue with white binding, matching headstock
ParkerGuy
Active Member
7 String Parker, korina body and neck all jet black with RMC saddles and 2 custom Humbuckers. Trem, RS Guitarworks PRS High Gain electronics upgrade kit. Neutrik Locking Jack and DIN-8 Midi Jack.
Since parker will never make a seven, id like another Alembic 7.
Id do a Korina or Maple/Mahogany Body
The same 7 piece purpleheart/maple/ebony neck w/ maple fretboard
Maybe a 28 Scale if not then a regular 25.5
Conical Fretboard Radius
Stainless Frets
Nickel hardware
2 Passive Humbuckers maybe ludgren or something in that vein.
Titanium Trem (skyway/kahler/hipshot?) If not Trem then wrap around prs style bridge
Graphite Nut
Sperzel or Steinberger Tuners
Since parker will never make a seven, id like another Alembic 7.
Id do a Korina or Maple/Mahogany Body
The same 7 piece purpleheart/maple/ebony neck w/ maple fretboard
Maybe a 28 Scale if not then a regular 25.5
Conical Fretboard Radius
Stainless Frets
Nickel hardware
2 Passive Humbuckers maybe ludgren or something in that vein.
Titanium Trem (skyway/kahler/hipshot?) If not Trem then wrap around prs style bridge
Graphite Nut
Sperzel or Steinberger Tuners
Kornagle
Member
This as neck-thru with an OFR tremolo with piezo saddles. Though I'm not sure about the pickups, either Bare Knuckle or DiMarzio's.
You got that one from the v-rg builder, right?
Cancer
Gazzmask
A Carvin 7x7 with the following changes:
--a Non-rounded body option
-- the tremolo, pickups, and neck sunk into the body so that he strings are flush with the surface of the top.
-- 25 frets and a 26 or 27 inch scale.
--a Non-rounded body option
-- the tremolo, pickups, and neck sunk into the body so that he strings are flush with the surface of the top.
-- 25 frets and a 26 or 27 inch scale.
Mine would have to be a Schecter Avenger body style.
26.5" Scale neck
Hard Ash body
5 piece neck thru (Maple with Mahogany stripes) with a birdseye maple board.
Clear blue gloss finish
BK Nailbomb in the bridge, and a cold sweat in the neck.
Locking tune-o-matic bridge with string-thru.
White binding.
Small pearl pentacle between the pickups.
Coil tapped.
Only a volume knob (push-pull) and a 3-way switch.
26.5" Scale neck
Hard Ash body
5 piece neck thru (Maple with Mahogany stripes) with a birdseye maple board.
Clear blue gloss finish
BK Nailbomb in the bridge, and a cold sweat in the neck.
Locking tune-o-matic bridge with string-thru.
White binding.
Small pearl pentacle between the pickups.
Coil tapped.
Only a volume knob (push-pull) and a 3-way switch.
FoxZero
Zero Imperfections
I can't really describe the body cause it's stuck in my head and I can't fucking draw.
Maybe I'll figure out how to use this cad program some day
Maybe I'll figure out how to use this cad program some day
Sawyer
Well-Known Member
Just gimme KoRn´s K7 -_-
right_to_rage
Avant Temporal
This might be crazy, but here it goes...
This paint:
On an RG1527:
Equipped with a Bare Knuckle Nailbomb pickup in the bridge:
and
A Bare Knuckle Cold Sweat in the neck:
That is my dream seven-string right now.
Question: Is the Neck removable from the Rg 1527? (which would enable body painting by a swirl painter)
Edit: answered my question, yes, the neck is bolted on. this project would roughly cost me $2000. Its actually very reassuring.
This paint:
On an RG1527:
Equipped with a Bare Knuckle Nailbomb pickup in the bridge:
and
A Bare Knuckle Cold Sweat in the neck:
That is my dream seven-string right now.
Question: Is the Neck removable from the Rg 1527? (which would enable body painting by a swirl painter)
Edit: answered my question, yes, the neck is bolted on. this project would roughly cost me $2000. Its actually very reassuring.
Stealthdjentstic
Banned
An Ibanez S7 with 24 frets, EMG after burner, some new pickups, a Black and really dark red paintjob that still shows the grain, plus the awsome looking skull on matt bachands ibanez sig exactly where it is on his sig except on my guitar in in dark red.
Wildchild777
New Member
My dream 7 would be a custom brand by me called Syrinx 
Model Name: Fenris
Body Shape: RGA
Body Wood: Ash or Mahogany
Neck: Thin maple neck
Scale: 25.5"
Fretboard: Maple
Headstock shape: cross between a Caparison (only reversed) and an Ibanez headstock
Bridge PU: Evo-7 or a Tone Zone 7 (white)
Neck PU: Air Norton 7 or Tone Zone 7 (white)
Bridge: Floyd Rose (perphaps an OFR)
Inlay: Only side dots
Hardware: A volume knob and a tone knob, 5-way Pu switch
Hardware color: Chrome (also the bridge)
Body and headstock color: Snow/Arctic White
That's about it
Model Name: Fenris
Body Shape: RGA
Body Wood: Ash or Mahogany
Neck: Thin maple neck
Scale: 25.5"
Fretboard: Maple
Headstock shape: cross between a Caparison (only reversed) and an Ibanez headstock
Bridge PU: Evo-7 or a Tone Zone 7 (white)
Neck PU: Air Norton 7 or Tone Zone 7 (white)
Bridge: Floyd Rose (perphaps an OFR)
Inlay: Only side dots
Hardware: A volume knob and a tone knob, 5-way Pu switch
Hardware color: Chrome (also the bridge)
Body and headstock color: Snow/Arctic White
That's about it
My dream guitar would look exactly like this:
Except it would be blue. Although I love this orange colour on the RG8427F that I have now.
The specs would be the same as the RG8427F except it would have a DiMarzio DS7 in the bridge position and a piezo pickup set in a ZR-7 bridge.
Body: Mahogany w/Maple Top
Neck: Maple/Wenge w/Rosewood Fretboard, Ultra Bolt-On Neck w/VelveTouch Finish
Scale: 25.5"
Pickups: B: DS7 N: AN7
Bridge: ZR-7
If anyone can photoshop this dream machine I would be very appreciative.
Except it would be blue. Although I love this orange colour on the RG8427F that I have now.
The specs would be the same as the RG8427F except it would have a DiMarzio DS7 in the bridge position and a piezo pickup set in a ZR-7 bridge.
Body: Mahogany w/Maple Top
Neck: Maple/Wenge w/Rosewood Fretboard, Ultra Bolt-On Neck w/VelveTouch Finish
Scale: 25.5"
Pickups: B: DS7 N: AN7
Bridge: ZR-7
If anyone can photoshop this dream machine I would be very appreciative.
Holy shit, I didn't even notice, and I'm normally a bump nazi.
vampiregenocide
Well-Known Member
- Joined
- Sep 9, 2008
- Messages
- 16,158
- Reaction score
- 2,106
Well I quite like the first act guitar (just in appearence) that Brents Hinds has.
I'd have that bodyshape but not by First Act, with these specs:
Body - Mahogany
Neck - Some dense wood, don't know what exactly
Fretboard - Ebony
Scale - 25.5
Pickups - A single bridge EMG707
Hardware - all gold - gotoh tuners with the TonePros bridge like the Loomis 7
Inlay - An aztec snake around teh 12th fret, and R.A.W o the 24th
Finish - Tealburst
I'd have that bodyshape but not by First Act, with these specs:
Body - Mahogany
Neck - Some dense wood, don't know what exactly
Fretboard - Ebony
Scale - 25.5
Pickups - A single bridge EMG707
Hardware - all gold - gotoh tuners with the TonePros bridge like the Loomis 7
Inlay - An aztec snake around teh 12th fret, and R.A.W o the 24th
Finish - Tealburst
