Pretty straightforward question. Has anyone tried any of these EMG tone controls with Fishman Fluence or Seymour Duncan Blackouts? Is it even possible? I’m also curious about the EXG, AB/220, or VLPF. Ideally I’d like to replace the master tone control in one of my guitars, probably with the...
Long story short, after settling on a JPX7 as my main seven string I decided I needed to add another baritone to the collection. I tried a few different guitars over the past few years including an LTD Black Metal, Schecter KM II & III and Mach 7’s, etc. I had always been interested in Agiles...
Hey all,
I have a lower tier Ibanez RG2EX2, it's a cheaper RG, think it was a GC exclusive years back.
Anyways, I've owned about a dozen guitars over the years, and this one plays amazing, and I love it. It's my #1, even though I have way "Nicer" guitars.
So, question is, the stock pups...
Brief & Accurate Description of desired gear: Looking for a set of SD Blackouts (8 string) neck and bridge
Modifications (if any): N/A
Accessories (hardshell case etc): N/A
Location (City,State or City,Country): Rochester, NY
International OK? : NO
Contact Info (No Phone #s): PM here... My...
I have a Hellraiser C-8 Hybrid that I love dearly. The emgs in it are good pickups, more dynamic than the other emgs I've played but I'd like a more full and pronounced low end that I think Blackouts would give me. I know the Blackouts are bigger than the passive sized emgs and I will need some...
I'm looking for a guitar with a 24.75 scale length for a fatter sludgier sound and a floyd. I plan on getting a C standard setup with 12-60 strings for a starting point. This guitar seems to have everything I'm looking for. It has a neckthrough mahogany body/neck, a floyd 1000 series (which I...
Traded a BC Rich Mockingbird that was just sitting in my rack gathering dust for this sweet Jackson JS22-7 with Seymour Duncan Blackouts. It's a little flawed(nut was cut way too deep and might need a little fretwork) but those are easy fixes. Was actually going to wait until I got it to perfect...
Okay, so I have been GASing for Schecter Solo II lately. My choice is down to Schecter BlackJack ATX solo II vs Schecter Platinum Solo II. They both have similar features. But two features that set them apart are the tone wood and pickups. Blackjack ATX has Swamp-ash wood and duncan Blackouts...
Hi all, since last February I was supposed to be saving some money due to increased family obligations. So my budget was severely decreased and I was only able to drool over guitars and NGD's here. It seems though that this didn't stop me from making two NGD's with cheaper guitars, a Jackson...
Plan on buying one of these and want to swap out the stock pickups with either blackouts or dimarzio d activators. They are passive pickups with the look of actives. I plan on having a luthier do all the work so I don't need any info on necessarily how to do it, just how each pickups will fit in...
1st Generation Ibanez Iron Label 8 w/ Dimarzio Ionizers
Modifications: Swapped out the EMG 808s with Dimarzio Ionizers
Accessories: Ibanez fitted hardshell case
Location: Rancho, California; USA
International OK? : No international.
Contact Info: Here, or jt.royer2009@gmail.com
References...
Brief & Accurate Description of gear/guitar: Seymour Duncan Blackout AHB-1 Phase-1s 7 string. These came in a RG7 I bought and I am not a fan of active pickups(DiMarzio junky). They look almost new with very little wire cut during installation. Very long leads on all the wiring.
Modifications...
So I'm getting an RGA8 in the mail in a couple of days, and I'm 99% positive I will hate the pickups. I'm wondering if the Nazgul/sentinent set are worth the extra 100 bucks over the blackouts. I'm not opposed to other pickup suggestions, but I can't really afford Lundgren (wish I could!)
I...
Brief & Accurate Description of gear/guitar: Brand new 2013 Ibanez RG Prestige 3250MZ (barely played on)
Modifications (if any): Seymour Duncan EMTY Blackout (bridge and neck)
Accessories: Hardshell and strap/locks
Location: Los Angeles, CA
International OK? : No
Contact Info: PM or...
Hey guys. I have a quick question!
I have to do a full wiring job on my Soloist Pro and decided that I might as well change pickups anyway!
So I've been looking into Blackouts and that brought me to the solderless Liberator. So I was wondering if the two go together or not? Not tonally...
I'm buying a 7 string in a month or two.
It's an older Ibanez Japanese RG model, with SD Blackouts in the neck/bridge and one volume.
This is going to sound like a dumb question, but what should I expect? :lol:
Hi,
I just got a new guitar in the mail (Agile Interceptor Pro 930) and it has an extremely weak signal. I turn the volume on my amp WAY up and still, even with overdrive, it makes a very quiet sound and has horrible sustain.
Agile Interceptor Pro 930 MN Nat Satin - RondoMusic.com
Is...
Brief & Accurate Description of gear/guitar: Used set of Seymour Duncan Blackouts 8 8-string pickups (near perfect cosmetic condition) in original case. Also included (and never used) are the included 2 25K pots, capacitor, screws, washers, springs, stereo jack, battery clip, and mounting foam...
Brief & Accurate Description of gear/guitar: Used set of Seymour Duncan AHB-1 Blackouts (near perfect cosmetic condition) in original case and with included 2 25K pots, capacitor, screws, washers, springs, stereo jack, and mounting foam. I think everything is the original from Seymour Duncan...
Hi everybody first post ever so forgive me if i post this wrong, or what not. Right now I am looking at 2 sets of pickups, the Duncan AHB-1 Blackout, and the EMTY AHB-3 Blackout. Note that I am looking at the 7 string phase 1 version of both. I was simply wondering what is the difference between...