I bought the guitar in October used, it was in brand new condition. It's been played, there is some tarnishing on the bridge pickup and the tailpiece due to my sweat being rather acidic apparently. I'm looking to get $325 for it, it comes with the agile hardshell case. I will be providing more pictures later. I've A/B'd this guitar with a Gibson les paul custom through the same rig (Mesa 2ch Triple Rectifier w/ Maxon OD808, Mesa roadster w/ modded TS7) and this guitar held up just fine 
.
here's a clip of the guitar from yesterday:
http://www.terrorhorse.com/gearday/buddaagile.mp3
Specs:
# Solid mahogany (not a multi-ply!) arch top body
# Triple bound front and back of body, and front of headstock. Single binding on neck.
# Candian Maple Flame Top
# Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
# Two Type V Alnico humbucker pickups for warm, tradional sound
# The AL-3100 comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
# Two volume and two tone controls, plus a three way pickup selector switch
# One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
# Ebony fretboard with 22 Jumbo frets and real Mother-Of-Pearl Trapezodial inlays
# The AL-3100 features D'addario strings installed at the factory and a professionally cut Graph Tech
# Individually hand filed frets for professional feel and playability
# Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
# Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
# Overall length: 40"; Scale length: 24.7"
# Body thickness: 2" at edge; Width at the widest point: 13"
# Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
# Actual Weight is only 10 lbs
Pics:
.here's a clip of the guitar from yesterday:
http://www.terrorhorse.com/gearday/buddaagile.mp3
Specs:
# Solid mahogany (not a multi-ply!) arch top body
# Triple bound front and back of body, and front of headstock. Single binding on neck.
# Candian Maple Flame Top
# Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
# Two Type V Alnico humbucker pickups for warm, tradional sound
# The AL-3100 comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
# Two volume and two tone controls, plus a three way pickup selector switch
# One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
# Ebony fretboard with 22 Jumbo frets and real Mother-Of-Pearl Trapezodial inlays
# The AL-3100 features D'addario strings installed at the factory and a professionally cut Graph Tech
# Individually hand filed frets for professional feel and playability
# Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
# Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
# Overall length: 40"; Scale length: 24.7"
# Body thickness: 2" at edge; Width at the widest point: 13"
# Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
# Actual Weight is only 10 lbs
Pics:
