String Gauges for A Standard on 27" scale

[mortality]

Sometime in the next week I'll be getting my new Agile Septor Elite 727, and I'm probably going to be putting on new strings. So my question is:

What would be the best string gauges to tune to A Standard on the 27" scale length?

 

[Stealthdjentstic]

I would use 9-46 + either a .59 or .62.

 

[mortality]

Thanks

 

[XeoFLCL]

I'm actually using .09-.42 w/ a .54, but I think yeah a .56 on top would suit it alot better. I think anything bigger than that would be unnecessary personally, but I'm sure 90% of the forum will disagree with me there . Keep in mind, one of the whole points of having a 27" scale is so you can use lighter gauges to obtain the same tuning so you in return get a clearer tone, so my approach would be to go as light as you could, and then find your comfortable gauge from there.

 

[Chiba666]

My 727 is in A standard with the following gauges.

010-013-017-w030-w042-w052-w064.

Strings are not floppy but I like the tension.

 

[BabUShka]

How can you guys use that thin gauge.. ? Insane.
For A standard I'd use, with my Hellraiser C7 26.5" scale:
11-52 with a .64 on bottom.

I like it medium tight, not too loose. And its easier to archieve ultra low action with thicker gauge imo.

 

[All_¥our_Bass]

Minimum 60, max 70.

 

[Heroin]

len 27"

D4 .010" DAPL == 6.54kg
A3 .013" DAPL == 6.21kg
F3 .017" DAPL == 6.69kg
C3 .026" DANW == 7.43kg
G2 .036" DANW == 7.88kg
D2 .046" DANW == 7.06kg
A1 .060" DANW == 6.9kg
(regular gauge w/ a 60)
total == 48.71kg

len 27"

D4 .009" DAPL == 5.3kg
A3 .011" DAPL == 4.44kg
F3 .016" DAPL == 5.92kg
C3 .024" DANW == 6.37kg
G2 .032" DANW == 6.37kg
D2 .042" DANW == 5.96kg
A1 .056" DANW == 5.97kg
(9-42 set w/ a .056 if you want to go lighter)
total == 40.33kg