kingpinMS3
dumb, but harmless
sure, I could get a pedaltrain or whatever, but i won't get the satisfaction of "DUITCHERSELF!"
here's the basis of the board. I honest to god don't even remember the dimentions i used to buiild it. i just kinda started cutting wood and putting it together.
then i created the slats for the pedals to sit on. this will give me 3 rows of pedals along with an accessible underside of one of the slats. they're sitting on hinges.
after that, I gave it a coating of truck bed liner. I thought it would be a little more durable than your average spraypaint
the original idea was to give it a coat of bedliner, and spray the sides with daphne blue, but the spraycan of blue i had was clogged in an odd way and created a really near pattern. then, i gave it a little bit of purple overspray to create an interesting finish
I still have to wire these up, but it will have a total of 6 neutric jacks to drive 3 different preamps(SATAN preamp, KSR ceres, and POD HD PRO x) and all output to my randall satan.
and this is kind of what the finished product should look like. I have a decibel 11 pedal dr on the way which will help drive looping and midi controls and be the "brain" of the board, plus i made room for the KSR ceres when it's released
the final signal path will look like this:
Rack(wireless) to board, input to Pedal Dr
Pedal Dr will have loops setup for Satan preamp, KSR ceres, and pod hd pro x. i will be able to program each one individually, and still have loops leftover for "preamp" input and "loop level" inputs.
the pedal dr will output to the zuul as a master gate, then that will output to the loop in of the SATAN.
I'll post more updates as i work on it and finish it, but that's what i have setup for now.
here's the basis of the board. I honest to god don't even remember the dimentions i used to buiild it. i just kinda started cutting wood and putting it together.
then i created the slats for the pedals to sit on. this will give me 3 rows of pedals along with an accessible underside of one of the slats. they're sitting on hinges.
after that, I gave it a coating of truck bed liner. I thought it would be a little more durable than your average spraypaint
the original idea was to give it a coat of bedliner, and spray the sides with daphne blue, but the spraycan of blue i had was clogged in an odd way and created a really near pattern. then, i gave it a little bit of purple overspray to create an interesting finish
I still have to wire these up, but it will have a total of 6 neutric jacks to drive 3 different preamps(SATAN preamp, KSR ceres, and POD HD PRO x) and all output to my randall satan.
and this is kind of what the finished product should look like. I have a decibel 11 pedal dr on the way which will help drive looping and midi controls and be the "brain" of the board, plus i made room for the KSR ceres when it's released
the final signal path will look like this:
Rack(wireless) to board, input to Pedal Dr
Pedal Dr will have loops setup for Satan preamp, KSR ceres, and pod hd pro x. i will be able to program each one individually, and still have loops leftover for "preamp" input and "loop level" inputs.
the pedal dr will output to the zuul as a master gate, then that will output to the loop in of the SATAN.
I'll post more updates as i work on it and finish it, but that's what i have setup for now.