Search results

  1. P

    Or FT: Bare Knuckle ceramic nailbomb 6 bridge pup

    Trade my Miracle Man for your ceramic Nailbomb? Same specs.
  2. P

    Mishas Sig?

    Can someone measure their bridge pickup height from the top of the polepieces to the bottom of the low and high strings for me? Thanks!
  3. P

    6 string BK Juggernaut pickup

    I have a Miracle Man black bobbin 53mm short leg drilled for direct mount if you're interested.
  4. P

    Peavey 5150 broken resistor

    Yes, that is your problem. The resistors in that circuit is for your +23v and -23v lines, which go to the heaters on one of the preamp tubes, as well as the reverb circuit, switching circuit, and a muting circuit. Replace all 4 resistors and you should be good to go. I would consider doing a...
  5. P

    Sudden loop issue with Mesa Mark IV

    Try cleaning the loop jacks with Dexoit first and report back. The loop send should shunt to return when nothing is plugged in. Most likely this connection has become intermittent due to a dirty jack.
  6. P

    Scrachy pickups selector - what do you use?

    Deoxit or CRC contact cleaner works very well.
  7. P

    Share Your Coolest Interactions With Famous Band Members!

    I jammed on stage with John Petrucci at a clinic he did in Raleigh, NC after the Train of Thought tour. There were 2 separate clinics held that day, one that went in depth with guitar playing, the other was your standard type clinic with a Q and A session. I attended both. At the first clinic...
  8. P

    The Devin Townsend Supermegathread!

    Now with Nolly!
  9. P

    Periphery Megathread: Everything Periphery

    I've got to say, I can't stop listening to this album. When P1 came out, I was not impressed at all. Sorry. Just seemed immature IMO. I wasn't sure what to think about P2, but I was pleasantly surprised. It was almost like an entirely different band. Juggernaut was just ....ing nuts (in a good...
  10. P

    Tube socket tension

    Basically, if the tube slides in and out of the socket with very little force, you need to go in with a tiny precision screwdriver or even a thin nail and squeeze the socket springs together. http://billmaudio.com/wp/?page_id=171
  11. P

    Original Floyd Rose into Lions Claw JEM cavity?

    Yes. http://forum.ibanez.com/yaf_postst83402_What-trem-goes-into-what-cavity---MUST-SEE.aspx
  12. P

    Darkglass B7K Demo/Review - HOW TO ROCK

    Video is private...
  13. P

    The OG Periphery Signature Model Triumvirate!

    You sir, are an asshole. :)
  14. P

    Mark IV loop question...

    I'm an amp and guitar tech on the side. PM me if you want me to have a go at it.
  15. P

    Mark IV loop question...

    I don't have a Mark IVA to look at, so I'm going purely by the schematics. In theory it should work.
  16. P

    Mark IV loop question...

    http://www.freeinfosociety.com/electronics/schematics/audio/pictures/mesaboogiemark43.jpg It looks like you can do it if you take the input of the normal loop and move it from the Loop Select switch and put it on the junction where LDR19 and LDR18 meet (the return of the switched loop). Cut the...
  17. P

    EBMM JP X+ series question

    If you're hell bent on sanding the back of the neck, try waxing it with a good car wax like Meguiar's Ultimate Wax. You may like the feeling of it and it's not permanent.
  18. P

    Trem Issue - screw broke off

    Judging by the looks of the broken bolt, it looks as if it's already got a dip dead center. And since it's nearly flush with the edge of the saddle, he shouldn't screw up the threads as long as he stays dead center and works slowly. Spraying the bolt with some PB Blaster to get it to creep in...
  19. P

    Trem Issue - screw broke off

    Get a set of left handed drill bits. Punch the broken bolt directly in the center. Using the left handed drill bit, run the drill in reverse and try to drill out the bolt. Hopefully the bolt itself will catch and spin itself out.
  20. P

    Bare Knuckle black bridge pickups 6 string ceramic

    $125 OBO. Tabs have been drilled for direct mounting.


Latest posts

Top