fix

  1. neurosis

    Think my Xbox One power supply is defective. Don't know how to fix or replace it.

    Maybe a dumb question but the power brick on my Xbox One seems to have given up the ghost. It works when the console is off but the moment I turn the console on and it draws power the brick shuts down and the LEDs go off. I can then reset the brick, reconnect everything and get LEDs again but...
  2. NewCultKing

    Quick glue repair question!

    Hi y’all, I recently imported a guitar to the states and one of the points unfortunately came in damaged, which is odd considering how well the guitar was packed. I wanna try glueing the tip back on. Has anyone repaired this type of damage with just super glue? Or would I need to get proper wood...
  3. p0ke

    Fixing/replacing broken Firewire ports possible?

    Does anyone have any experience with these things? I think the reason for the ports breaking is that the FW-card in my PC is a cheap piece of crap, and it doesn't take much force to connect an FW cable upside down... Needless to say, I did several times, and I think what basically happened was...
  4. neurosis

    Neumann KH 120 A (terrible hiss – repair?)

    Hello all, I recently acquired four of these ACTIVE monitors. They were going to throw them away at work and I thought I'd see if I can save and use them. One of them is perfect. No issues at all. The other three power on but each have their issues: One powers on but makes no sound. The front...
  5. Gmork

    Please help me fix my pedal, im freaking out.

    pedal - Maxon st9 pro+ (tubescreamer). using an adaptor as i always have. i see it is still being powered because there is an (9v or 18v) indicator that always stays lit up depending on what you have it set to. that is still lit up. the problem is that the footswitch wont engage. if i...
  6. Ernesto

    Music Gear Repair in Arizona

    This isn't a business. A few times a year, I need some money, and I offer up my repair skills at great rates. I don't have an oscilloscope right now so I can't do some stuff but in 20 years, I've only had two or three pieces of equipment that I couldn't repair with a meter and soldering iron...
    • Ernesto
    • Thread
    • custom fix modifications repair soldering technician troubleshooting
    • Replies: 0
    • Forum: Musician Classifieds
  7. I

    Not sure if I should trade for this eight string (LTD SC-608b)

    Hey guys, I just got an offer today for my LTD AW-7. I've had this guy up for trade for awhile looking for an eight string guitar, and someone finally offered me the LTD SC-608b in exchange for it. The guy selling was very straightforward and mentioned that there is a noticeable chip on the...
  8. S

    Repairing bad routing job for EMG 707!

    Hey guys, first post so I apologise if it's in the wrong thread. Long story short, just got a bargain 7 string to use as a project guitar which will be stripped down to the wood, veneered etc. However, first job is fixing a pickup cavity which someone crudely chiseled away at to fit an EMG...
  9. K

    Fix or scrap?

    My guitar (Ibanez RGA72TQMz) isn't working because of the threads in one of the intonation holes on the trem are stripped. What am I supposed to do? Im pretty sure I can't order an Edge Zero 2 baseplate just like that. Should I strip the guitar of anything useful and sell off? Or try to fix it...
  10. jonajon91

    Bowed neck - can I fix this - limited knowledge & tools

    The point of this is can I fix this? My newest bass is a Marleaux Consat Custom 6 that I got second hand from Bass direct in Warwic England. I have recently noticed that the highest two string have some buzz at the bridge and that some of the frets buzz a fair bit. I took it to both my local...
  11. Bucketheadtwo

    Edge Tremolo Housing Fix?

    Didn't know if I should post this here or general tech, so sorry if I got it wrong :P WARNING: Slight guitar misuse ahead. You may or may not cringe. I realize I am slightly stupid. :wallbash: Being the dumb kid that I was a while ago, the first time that I had to replace the strings on my...
  12. P

    Change strings - Floyd rose

    Hey people, i just bought my first seven. It's cheap and used and the floyd isnt an original. Well i wanted to change the strings but i wasn't aware at the time how you 're supposed to do it ( one string at the time) and i did mess it up. So now the floyd is very low and the strings are on...
  13. I

    My guitar's nut...

    Hey all, My guitar nut recently broke (the low E side snapped off when I was playing) and so I obviously went and got that fixed. Unfortunately however, after receiving the "fixed" guitar my action is so god damn high, it's not even fun to play anymore. It's literally three millimeters off the...
  14. B

    Installing ezdrummer for mac

    I'm having trouble installing ezdrummer. It runs throughout the installer and says in it installed successfully, but it doesn't not show up with the rest of the plug-ins in garageband. Thanks, Brian
  15. Gabe_LTD

    How to fix Dead notes on a floyd rose guitar?

    Hi I am having troubles with a couple dead notes on my guitar on the high e string frets 16-20. every other fret on every other string is good except those frets. its really bugging me because i like to do bends on those frets for solos. The guitar is in standard D tuning it is a LTD H-351 FR...
  16. E

    8 string guitar tweaks

    Just had to let everyone know, If u hav a problem with the 8-string buzz, particularly the Schecter Damien one, or work with 8 string drop tunings, you might want to up the gauge, I went from a 74 to 80 and it sounds, plays, and feels better-I'd say it(Schecter Damien 8 string) really should...
  17. C

    Ibanez 7421/7420 project

    Brief & Accurate Description of gear/guitar: 7421 that was converted to a 7420 Modifications (if any): converted, and comes w EMG's Accessories (hardshell case etc): none Location (City,State or City,Country): Point Pleasant, NJ Contact Info (No Phone #s) PM me please References Required (eBay...
  18. Varjo

    Doctor T's workshop-hospital: Repairing an vintage Ibanez

    Hello fellow ss.org’ers! Today in Doctor T’s workshop-hospital we have a very seroiusly injured patient. He’s a 39 year old patient with nothing but trouble. But have no worries, we will fix him good as new! The patient. Yes. A 1969 Ibanez Soundmaster II, forgotten in a garage. The...


Latest posts

Top