p90

  1. col

    FS LP Jr. Ziricote top, honduran mahogany neck

    Brief & Accurate Description of gear/guitar: LP Jr. built by yours truly in 2023. Khaya body, ziricote veneer top, maple cap, honduran mahogany quartersawn neck, figured ebony fretboard and headstock veneer, Gotoh tuners, handwound P90, Tonepros bridge. Stainless medium jumbo frets. Graphtech...
  2. col

    I made this (P90 metal tone)

    12k DC resistance, ceramic magnets. I've never owned a guitar with P90's, so I don't know how they're supposed to sound. But I'm pretty fond of the sound of this one. Very different from EMG's which I've used for decades. Criticism welcome! As said, I know nothing about P90's. :ugh:
  3. guitaardvark

    Having trouble with 2x P90 + DPDT series/parallel config

    Hey all, I'm trying to rig my guitar with 2 P90s (Seymour Duncan Phat Cats), 1x volume, 1x tone, 3 way toggle, and on-on DPDT switch so that I can switch between parallel and series for the P90s. I have been using this wiring diagram, since it's the only one I can find for my ideal setup...
  4. J

    Seymour Duncan Phat Cat Humbucker sized P90

    I have played a lot of different P90 pickups before but the Seymour Duncan Phat Cat P90s (they are humbucker sized) seem to be the best of the bunch. In general I find most p90s kind of weak sounding. I also like that the Seymour Duncan’s seem to be silent. The 60 cycle hum on some of these...
  5. S

    P-Rails in Baritone - What way should Rail be?

    I'm putting set of SD P-Rails in a 27.7 Baritone 6 string build. Its Probably gonna be in Drop F and was wondering what way I should have the rails? I've got a DiMarzio D Sonic in another 27.7 baritone and I remember reading up here its better having the rail towards the bridge forblower...
  6. Se7enHeaven

    Keyztone Exchanger (change the nature of your pickups)

    SOUND: The EXchanger has one primary focus: Due to a pickup’s behavior you are able to dial into an ideal or different sound better. To make this obvious, the sound coming from a single-coil pickup is different from a P90, which is different from a modern high-gain/output pickup, etc. And...
  7. rikomaru

    Bar Knuckle HSP90s

    Anyone here have experience with the HSP90 pickups from BK? I'm particularly interested in the 7 string variants for a project I just started on my AX7521. I'm thinking I'll grab a Supermassive for the bridge and i've been eyeing both the Manhattan and Mississippi Queen for the neck position...
  8. Tisca

    Made in China HB size P90 review and dissection

    tl;dr review: It's great and going to buy another one . Most of the info here. Photo album: https://imgur.com/a/TrMnu (Aliexpress) Had been reading up on these cheapo pickups and was really interested to try something out for myself. One problem with MIC pups is that you don't always get...
  9. Masoo2

    Best first Jazzmaster?

    Wanting something that's not an 8 string with dual humbuckers and a hardtail. Been in a rut, started listening to post hardcore/math rock/indie/pop/dreampop, jazzmaster would better fit those sounds. I'm torn between the Vintage Modified, J Mascis Sig, or shelling out the dough for a 60's...
    • Masoo2
    • Thread
    • fender j mascis jazz jazzmaster offset p90 squier upgrades
    • Replies: 15
    • Forum: Beginners/FAQ
  10. axxessdenied

    Exploring Fuzz Tones with Plugins

    Started exploring getting gnarly tones with just plugins and I thought I would whip up a video to chronicle my progress. Here's the beginning of my journey. I'm using P90s in this video. Woooooo. Fun stuff :D
  11. philentology

    Reverb: 6 String Warmoth Bariton Tele Neck, Graphtech Piezo System, and More

    I have a few things for sale on my Reverb store including a beautiful Warmoth Roasted Maple Baritone Telecaster neck and a Graphtech Acoustiphonic System (without saddles), and some other misc. parts. https://reverb.com/shop/philips-gear-garage-26
    • philentology
    • Thread
    • baritone graphtech p90 piezo roasted maple telecaster warmoth
    • Replies: 0
    • Forum: eBay Deals
  12. A

    Middle Single Coil & Bridge Humbucker / P90 Size Pickup Recommendations w/Sustainiac?

    I've got a Hum/Sing/Hum Douglas Hadron 725 NA, I'd like to put a Sustainiac Stealth Pro driver in the neck position, and am interested in possibly swapping out the other pickups as well. 7-string humbuckers are pretty easy to come by, and mostly geared toward high-gain metal. That's not really...
  13. P

    Pickup Switching and other Wiring Help

    So what I plan on doing for a future build is have this rather configuration of pickups Bridge: Humbucker Middle: Single Neck: P90 I want to wire them so I can switch between these 5 modes (So yes, to a 5 way switch): Bridge Bridge + Middle Bridge + Neck Neck + Middle Neck I also want to...
  14. gunshow86de

    KxK 7DC #16 & Carvin LB76A

    Putting this at the top in bold: I am interested in trades for an 8-string only. We could do trade + cash (either end) or trade the KxK and Carvin together for the right offer. I am easy to work with in regards to making a fair trade. Interested in: Mayones, KxK, Ibanez (RG2228 or M8M only)...
  15. C

    Replacing pickups in Schecter ATX... P90's?

    Hi all, first post here though I've been lurking around for a couple of years :wavey: I'm thinking about ordering a set of 7-string P90's from Vintage Vibe Guitars, but I'm hesitating for a couple of reasons. The main one is I've never heard, let alone played a 7 with P90's. Are they the...
  16. Schecterwolf

    P90 "scratch" feedback

    Alright so I'm having a slight noise issue with p90s in my rig. Its not the hum, I have a decimator and it handles the hum wonderfully. The problem occurs when i scratch. I use my 60's tribute les paul for relatively high gain music as well as low gain and alot of cleans. When i start playing...
  17. technomancer

    NGD: KxK 7DC Claro Walnut

    I've had this for several weeks but have been REALLY freaking busy so I'm just now getting around to posting the thread :lol: Specs: - KxK 7DC double cut - 25.5" scale - flamed mahogany neck / body with center ebony stripe - claro walnut top - ebony board - ss frets - custom inlays front and...
  18. C

    NGD Zebrawood Custom Content (56k still exists?)

    So I chucked a deposit down on a guitar about 6 months ago. Bit of info: Built by Dell'Isola Instruments (For those who haven't heard of him, he's built an 8 string for Misha) Swamp Ash body with Zebra Wood top 3 piece African Black Limba neck reinforced with two 1/8 inch...
    • Connor
    • Thread
    • ash dell'isola leather handle limba ngd p90 zebrawood
    • Replies: 7
    • Forum: Standard Guitars
  19. technomancer

    SOLD In Stock : KxK Burl Maple 7DC

    SOLD Specs: 25.5" scale Mahogany neck thru Mahogany body Burl Maple body/head top, Ebony logo inlay 12"-16" radius Birdseye Maple fretboard Tone Pros bridge-string thru Sperzel locking tuners Custom KxK hand wound burl maple topped P90-7 pickups (Standard Passive humbucker routs)...
  20. technomancer

    Gibson Les Paul Studio 60s Tribute Opinions (pics of my incoming guitar added)

    So I've had some serious GAS for one of these lately, anybody played them? NOT looking for alternatives, I want to know of any experience with these guitars, as $850 for a USA made guitar is pretty damn good and the gold top pictured is hot as hell :2c: (Max you know everything and have played...


Latest posts

Top