walnut

  1. raytsh

    FS Skervesen Shoggie DC 6 - walnut, mahogany, birdsey maple, BKP pickups

    Brief & Accurate Description of gear/guitar: I'm selling this Shoggie DC 6 from 2019. The guitar has rarely been played, mostly was stored in the case and looks like new, no dings, scratches or other damages. It is tuned to E-standard and has Daddario NYXL 10-46 strings on right now. The guitar...
  2. Rattlehead83

    FS Claas Moby Dick 6 Headless Custom Multiscale

    Brief & Accurate Description of gear/guitar: Custom Claas Moby Dick 6 Headless in excellent condition for sale. I'm open to trades as well. Accessories (hardshell case etc): Gigbag Location (City, State or City, Country): London, UK International OK? : yes Contact Info: Private message here...
  3. Rattlehead83

    FS Solipsist Guitars Handmade Chameleon-6 2019 Semi-Hollow Multiscale

    Location: Europe International OK? : yes Contact Info: Private message / dinamo1800@gmail.com Price: 999€/1,140$ Solipsist Chameleon 6 string Semi-Hollow Multiscale Finished recently, entirely built by hand with high attention to details. Plays great, has low action, hemispherical frets...
  4. Grizz2k6

    ML-1 Trem issues

    Recently picked up an early model Chapman ML-1 with the minihums and the hipshot hardware. Tuning stability wasn't amazing but not unmanageable when I got it. Changed string gauges and tuning, set neck tension, spring tension, and saddle height to setup for Drop C and suddenly it won't stay in...
    • Grizz2k6
    • Thread
    • cgcfad chapman drop c drop tuning hipshot ml-1 out of tune tremolo tuning issues walnut
    • Replies: 8
    • Forum: Standard Guitars
  5. Rattlehead83

    FS Handmade Custom Ibanez RGA-like electric guitar

    Location: Europe International OK? : yes Contact Info: Private message / dinamo1800@gmail.com Price: 470€/$540 Custom guitar built by hand, finished 2 weeks ago. Specs: ✠ Neckthrough-3-pieces (maple&wanut) ✠ Ash body wings with walnut top ✠ Granadillo fretboard ✠ 25,5" scale length...
  6. Rattlehead83

    Roberto's Builds

    I've started an Ibanez RGA-like build few days ago. Neck through, 3 pieces maple and walnut; Body wings are ash and walnut.
  7. Jesse Zuretti

    FS 7 String Tele Custom Rosewood/Peruvian Walnut/Purpleheart

    PLEASE Don't offer trades, please. I'm not looking for gear from private sellers. Location (City,State or City,Country): Randolph, NJ International OK?: email me for a quote Contact Info (No Phone #s): jzuretti7 [@] gmail References (eBay or other forum userid): here, Reverb (The Music...
  8. HeadBender

    Cedar, Claro Walnut, Curly Redwood Tops, Padauk and Zebrano Neck blanks [EU]

    Brief & Accurate Description of gear/guitar: Tonewoods for Sale. *More pictures available, just PM me* Port Orford Cedar Drop Top Set Claro Walnut Drop Top Set Claro Walnut Les Paul Top Set Curly Redwood Top Set #1 Curly Redwood Top Set #2 Padauk Neck Blank Zebrano Neck Blank Modifications: -...
  9. Mike

    Black Water 8 String Custom Walnut Soapbar Pickup Set

    Brief & Accurate Description of gear/guitar: 8 String Soapbar Black Water Pickups. Modern Neodymium Bridge, Modern Alnico Neck Modifications (if any): N/A Accessories (hardshell case etc): N/A Location (City,State or City,Country): Cortland, OH International OK? : No Contact Info (No Phone #s)...
  10. OWHall

    NGD - .strandberg* boden 7

    Hi everybody, slightly belated NGD as I got this a couple of weeks ago now! This is my new Boden 7. It is an old strictly 7 built walnut top model, in fact it was the 7th production boden that they ever built! When they first went into production, Ola inspected and chose this guitar as one of...
  11. mbardu

    Amazing Claro Walnut CARVIN Contour 66 (c66)

    Gear/Guitar for Sale/Trade: Carvin contour 66 (c66) with fixed bridge, all options, amazing claro walnut top Additional Accessories (hardshell case etc): Hardcase Your Location (City,State or City,Country): California International OK?: OK if you pay shipping Contact Info (No Phone #s): PM...
  12. morgdav

    Two Multi-scale Builds

    I am planning to complete two simultaneous builds in six weeks or less. I have already built all the templates and jigs I should need so I am hoping this goes smoothly. Wish me luck! SPECIFICATIONS Build #1 Scale: 25"-25.75" Body: Swamp Ash Top: Grafted Walnut Neck: Roasted Curly Maple...
  13. Peter.F

    Belated NGD -DC700 Walnut/Maple

    I purchased this bad boy awhile ago, but It's about time I share some love to this community that has taught me so much. Specs: Flamed maple top Walnut neck and wings Ebony board without inlays 20" radius SS frets Stock pups This guitar plays and sounds fantastic. I have set...
  14. Albek

    /FT Carvin DC727 with BKP ceramic nailbomb (KOA+WALNUT) [EU]

    Brief & Accurate Description of gear/guitar: Carvin DC727 with BKP Nailbomb Selling this amazing guitar because I need a six string. The guitar is in good conditions 9/10 only 3 small dings on the neck you can see in the picture. Here's the specs: - Koa body - Koa neck through -...
  15. Purelojik

    The Crazy Ultra Flamed Walnut Build Thread (Lots of Pics bro)

    Alright guys Im starting this thread because I intend to finish this guitar fairly soon. I've already made the body and am making the neck as we speak. I'll transfer over some pics from my blog for the reason that if i have some questions, i can just post it here! Im also in progress with...
  16. Eliguy666

    Considering a First Build

    Long-time reader, first time poster. I've been playing metal electric guitar for four years, and acoustic on and off for eight. For some amount of time I've been considering building a guitar, but I have no right idea as to where to learn. If you've any advice for me on beginning, I'd be...
  17. Adrian-XI

    NGD: Carvin DC800 Walnut Top - My First 8

    Hotel room iphone pics gogogogo! I bought this from the Carvin store in Hollywood whilst on my honeymoon last week (pretty good way to start a marriage lol). This is my first 8 string, I was going to pick up an RG8 from guitar center but luckily I had a look across the...
  18. S

    Walnut Neck Through Six Build

    Decided to try making a neckthrough superstrat style guitar... with 26 frets! I have a pretty much unlimited supply of walnut and maple so I picked out a few pieces yesterday... I never get tired of that little loop in the grain on the right piece. I made both sides WAY bigger than I need...
  19. teamSKDM

    Which bareknuckles would be best for my custom order?

    Okay, well. Typically this would sound like a total noob question, but this is ACTUALLY very hard, seeing my wierd wood collection for my custom, so no amount of searching could help me. and want to hear some opinions. please dont bash me, because again. these specs, i could find not one thing...
  20. will_shred

    Thinking about an (almost) all walnut guitar. Bad idea?

    Looking to get a carvin DC727 (:shred:) with walnut/maple neck, walnut wings, and a flamed Koa top. i'm not %100 sure about the right terms of mids/highs/lows but I know that I want to have a very clear, defined sound. Because I like to play with a lot of big chords with a lot of gain. also the...


Latest posts

Top