This site may earn a commission from merchant links like Ebay, Amazon, and others.

technomancer

Gearus Pimptasticus
Super Moderator
Joined
Apr 15, 2006
Messages
30,379
Reaction score
13,316
Location
Out there, somewhere
Depends if you're doing stereo effects and stuff. You can do stuff like sending different amp models out the left and right outputs, etc, or stereo delay. If you're just using a very basic setup, I wouldn't bother.

There's also a setting that can route both the right and left signals to a single output. If you're running mono turn that on otherwise for stereo delays and such you're losing half the signal.
 

Andromalia

Pardon my french
Joined
Dec 24, 2009
Messages
8,750
Reaction score
3,215
Location
Le Mans, France
Some people at the fractal forums are very happy with the new 300W rocktron, will likely give it a try too, but I must sell something before I can afford it, buying the axefx sort of left my wallet quite thinner.
Axefx is in the post atm, will try it with my current mesa 20:20, will likely be good for mesa sounds and not-so-good for the rest.
 

CentaurPorn

Well-Known Member
Joined
Mar 8, 2008
Messages
1,072
Reaction score
249
Location
Fredericton NB
The only reason i am letting go of the 1540L Is because I want to give the Fratomic FRFR setup a try and selling what i have is probably the only way to get the girls approval on the purchase. I have a feeling I am not going to like it but I just want to give it a shot to try out some of the redwirez cab models etc.

If not Happy I will probably go back to a 1540L as I can not think of any other Power amp that would work better for my situation. I have no complaints about it at all and I am very happy with my sound. I am also a whore and like to explore new things.
 

Metalus

JP BFR Whore
Joined
Mar 9, 2009
Messages
2,207
Reaction score
237
Location
Miami, FL
Your power amp choice will affect the Axe-FX just as much as it would affect a preamp. If you want that "Mesa" sound, there are Mesa amp sims in the Axe-FX.

Im looking for a poweramp mainly for live use which is why im considering the Mesa 2:90.

Carvin tube power amp i heard is pretty good with the AXE FX, also been wodnering about the Fryette power amps.

it's really a gamble unless you can go and try it with these power amps in person mate, so it's really gunna come down to trying shit out or just blind buying

What are the pros and cons of Carvin tube power amps? I have no idea how they r :lol:

Trust me you won't be disappointed with the VHT/Fryette Power Amps, I have never experienced better tone across so many styles than with my setup now.

Can they do the whole "chugga chugga" type of tone well? In the vein of Loomis' solo album or Killswitch Engage?
 

Necrophagist777

can't bend....
Joined
May 10, 2009
Messages
1,059
Reaction score
125
Location
Akron, OH
Im looking for a poweramp mainly for live use which is why im considering the Mesa 2:90.



What are the pros and cons of Carvin tube power amps? I have no idea how they r :lol:



Can they do the whole "chugga chugga" type of tone well? In the vein of Loomis' solo album or Killswitch Engage?

Oh yea dude it will nail that for sure. I know it seems hard to believe but really anything is at your disposal as long as you learn the unit. I mean just the ability to add your own cabinet impulses into the unit adds tons of flexibility to the unit.
 

Metalus

JP BFR Whore
Joined
Mar 9, 2009
Messages
2,207
Reaction score
237
Location
Miami, FL
Oh yea dude it will nail that for sure. I know it seems hard to believe but really anything is at your disposal as long as you learn the unit. I mean just the ability to add your own cabinet impulses into the unit adds tons of flexibility to the unit.

Awesome thanks man. Im gonna be spending countless hours tweaking the fuck out of that thing when i get it :D
 

Larrikin666

Deadite
Joined
May 22, 2009
Messages
3,378
Reaction score
536
Location
Walnut Creek, CA
Does anyone have any good recommendations for interfaces that work well with the Axe-FX? I've seen the list of ones that work well on the Fractal forums. I have the garbage Fast Track sitting around, but I'd really prefer something that would enable me to use the digital outputs of the Axe-FX.
 

TomAwesome

I LIKE JUICE!!!
Joined
Mar 1, 2007
Messages
10,136
Reaction score
575
Location
Texas
If there's already a list on the Fractal forum, why are you asking here? Anything that has a S/PDIF input should work well for what you want to do.
 

Larrikin666

Deadite
Joined
May 22, 2009
Messages
3,378
Reaction score
536
Location
Walnut Creek, CA
If there's already a list on the Fractal forum, why are you asking here? Anything that has a S/PDIF input should work well for what you want to do.

The list on Fractal is just "Works" or "Doesn't work". I wanted addition incite from SS users about their good or bad experiences using their Axe with different interfaces.
 

orb451

Banned
Joined
Dec 15, 2008
Messages
1,978
Reaction score
743
Location
LV426
Well FWIW, I use the Lexicon Omega. Probably not the greatest interface out there, but it works for me. I use it w/ Cubase LE and run stereo out of the Axe into it with no issues.
 

Necrophagist777

can't bend....
Joined
May 10, 2009
Messages
1,059
Reaction score
125
Location
Akron, OH
I use a M-Audio Fast Track Pro, midi on it works great with axe-edit. Sound good enough. I do wanna get a bigger interface with more ins/outs someday though.
 

Cadavuh

Bounce The ....
Joined
May 29, 2008
Messages
1,521
Reaction score
388
Is only one of those 50W Atomic monitors enough to play at practices and shows? Enough to cut/be heard over the drummer etc...
 

Triple7

The Decepticon
Joined
Oct 16, 2008
Messages
4,319
Reaction score
694
Location
Yorktown,NY
So I got my Axe-Fx Ultra today and I'm dying to set it up and start playing with it. I have a question though.

I plan on using the Axe with a Carvin DCM 600 power amp, and a Peavey XXX 4x12 cabinet. The power amp has the option of running in stereo or mono, originally I had thought that my cabinet was just mono, but apparently it has the option of stereo as well. So should I run stereo or mono, and how do I do so?
 

TomAwesome

I LIKE JUICE!!!
Joined
Mar 1, 2007
Messages
10,136
Reaction score
575
Location
Texas
Is only one of those 50W Atomic monitors enough to play at practices and shows? Enough to cut/be heard over the drummer etc...

Should be.

So I got my Axe-Fx Ultra today and I'm dying to set it up and start playing with it. I have a question though.

I plan on using the Axe with a Carvin DCM 600 power amp, and a Peavey XXX 4x12 cabinet. The power amp has the option of running in stereo or mono, originally I had thought that my cabinet was just mono, but apparently it has the option of stereo as well. So should I run stereo or mono, and how do I do so?

Do you have any reason to run it in stereo? If not, run it in mono.
 

Triple7

The Decepticon
Joined
Oct 16, 2008
Messages
4,319
Reaction score
694
Location
Yorktown,NY
Do you have any reason to run it in stereo? If not, run it in mono.

Not as far as I know, I will be using it for live shows but as far as I know mono is what people do.

If I am setting it up mono, on the back of the Axe-fx there is the section Output 1 which has left and right, which one do I go out of, and which input do I go into on the back of the Carvin?

Sorry I know these are probably really obvious questions but I am a total noob at this, and don't want to mess either the power amp or the axe fx up.
 

TomAwesome

I LIKE JUICE!!!
Joined
Mar 1, 2007
Messages
10,136
Reaction score
575
Location
Texas
Either output since they're both the same, and probably input 1 on the Carvin. You should probably flip through the manual to be sure, though.
 
Top