zilla
Grand Poobah
Brief & Accurate Description of gear/guitar: Ormsby Hyper GTR 6
Modifications (if any): all stock. minty condition.
Accessories (hardshell case etc): Ormsby hardshell case
Location (City,State or City,Country): Calgary, Alberta, Canada
International OK? : Prefer to stay within Canada but willing to do international for the right trade.
Contact Info (No Phone #s): PM
References (eBay or other forum userid): reverb shop: https://reverb.com/ca/shop/mastereffects
Price (include currency and if firm/obo): 1700-ish
Pictures: see attached
would prefer to keep this somewhat local but would be to do international for the right trade.
Fanned fret neck goes from 25.5” to 27.5”.
From the ormsby web site:
Body dimensions (thickness): 38mm HypeGTR. The TX model has a 42mm thickness. For comparison, Jacksons, Ibanez RG, Fender Strats, etc are generally 47mm.
Neck shape: 19mm @ 1st, 21 @ 17th, D shape with round shoulders. AKA "thin U" (NOTE: this has changed from previous runs!),
carbon reinforced rods
HARDWARE
The bridges are custom made for us to exacting tolerances by our partners at Hipshot, using a variety of materials proven for longevity and tone.
Hipshot machineheads (locking).
TONE
Our own Nunchucker A8 Humbucker (HypeGTR) features pride of place in the bridge position,
De La Creme A2 in the neck.
Both of these pickups are made to our own specifications by our partners in Korea.
500k pots for volume,
3 way toggle,
500k push/pull tone pot for coil splitting.
Bone nut.
I dig superstrats and some single cuts: Old USA made Hamer guitars (diablo, Centaura, etc), Balaguers, Carvin ct6’s, Tokai Love Rock LS212 or higher spec, and things that do the chugs and have pretty flamed maple tops.
Not a HUGE fan of pointy guitars but you never know.
Modifications (if any): all stock. minty condition.
Accessories (hardshell case etc): Ormsby hardshell case
Location (City,State or City,Country): Calgary, Alberta, Canada
International OK? : Prefer to stay within Canada but willing to do international for the right trade.
Contact Info (No Phone #s): PM
References (eBay or other forum userid): reverb shop: https://reverb.com/ca/shop/mastereffects
Price (include currency and if firm/obo): 1700-ish
Pictures: see attached
would prefer to keep this somewhat local but would be to do international for the right trade.
Fanned fret neck goes from 25.5” to 27.5”.
From the ormsby web site:
Body dimensions (thickness): 38mm HypeGTR. The TX model has a 42mm thickness. For comparison, Jacksons, Ibanez RG, Fender Strats, etc are generally 47mm.
Neck shape: 19mm @ 1st, 21 @ 17th, D shape with round shoulders. AKA "thin U" (NOTE: this has changed from previous runs!),
carbon reinforced rods
HARDWARE
The bridges are custom made for us to exacting tolerances by our partners at Hipshot, using a variety of materials proven for longevity and tone.
Hipshot machineheads (locking).
TONE
Our own Nunchucker A8 Humbucker (HypeGTR) features pride of place in the bridge position,
De La Creme A2 in the neck.
Both of these pickups are made to our own specifications by our partners in Korea.
500k pots for volume,
3 way toggle,
500k push/pull tone pot for coil splitting.
Bone nut.
I dig superstrats and some single cuts: Old USA made Hamer guitars (diablo, Centaura, etc), Balaguers, Carvin ct6’s, Tokai Love Rock LS212 or higher spec, and things that do the chugs and have pretty flamed maple tops.
Not a HUGE fan of pointy guitars but you never know.