Post pics of your modded RG7'S !!

[AustinxAtomic]

^that's very nice.
I love the way the strings go through the body in that pattern.

 

[lookralphsbak]

You guys have inspired me. My first two guitars have been chilling in my room for the longest time. My first is a Yamaha and my 2nd is an Ibanez GAX-30(I think). I actually put the neck of the Yamaha on the Ibanez bc the nut on the neck broke on the Ibanez. Anyway, I think I'm gonna sand down the Ibanez and do a new paint job, maybe try out swirls, then perhaps buy a new neck for the guitar. The wood is super cheap and really light. The slightest impact and it dents. I may start with this body since I don't really care for the guitar much and if I enjoy the experience, I might customize my Yamaha as well, the body on that guitar has a nice weight and it's an all around nice guitar. If the guitars end up coming out nice I may look into buying used hardware and used pickups so I can upgrade them, although I may not upgrade the Ibanez because it's just too shitty of a wood.

 

[stevo1]

Buy this off of eBay?

 

[ruiner]

Buy this off of eBay?

maybe it's from ebay, but I bought this guitar in Moscow

 

[stevo1]

I saw on there a few months ago, I was going to buy it, but chose not to.

 

[JamesM]

Finished this evening!

 

[jcbakz]

update

 

[aleXander]

update

That is a very classy guitar brother.
If you ever wanna part ways with it let me be the first to know!

 

[thanos89]

hey ppls new guy here
dont have better pics atm but you can get the idea
one SM Blackout p2 18volt mod
purple matt paint with ghost flames
A# standard tuning using an ernie ball .060 for the low A#

 

[aleXander]

hey ppls new guy here
dont have better pics atm but you can get the idea
one SM Blackout p2 18volt mod
purple matt paint with ghost flames
A# standard tuning using an ernie ball .060 for the low A#

WELCOME!

And that's a VERY cool lookin' paint job.
Nice guitar brother

 

[davidb1986]

actually I don't know who did it, but now I play on this
it has rg7620 neck

So you're the one who outbid me on this guitar.

 

[DropTheSun]

Check my Profile Pictures!

I put some pics in there from my RG7321 project. I'll post the final pic in this thread, when it's completely finished.

 

[aleXander]

this thread should be stickied
so much guitar porn!!

 

[DropTheSun]

I finished this today!

BURNT RG7321:
-BKP Aftermath set
-Dimarzio electronics
-EMG PA2 Booster (really nice)

 

[TMatt142]

My 7620 and 7420 flanking my first CT

 

[BenEllerGuitars]

Mail me that CT so i can put some pickups in it for you : )

 

[TMatt142]

Mail me that CT so i can put some pickups in it for you : )

That was taken awhile back...I've got a CL/LF set in there now....

 

[Louis Cypher]

I finished this today!

BURNT RG7321:
-BKP Aftermath set
-Dimarzio electronics
-EMG PA2 Booster (really nice)

Loving this chap!

 

[MikeH]

here is my ibanez rg7421, sanded the finish off, and was pleasantly surprised by a maple veneer underneath... some previous owner tried to refinish it before. i then put a tung oil finish on it, and carved a cutaway on the lower horn for better access, and sanded the neck joint some, so its a tad thinner. also, i ebonized the fretboard.

That's a 7420, dawg. 0 = Tremolo. 1 = Fixed bridge.

 

[Djent]

For those who like to keep it simple/rough, here's the ever-so-controversial (at least here) Papa Smurf (RG7620, with a single EMG 707TW, covered in painter's tape)