Omzig
Well-Known Member
So on to wood...had some super heavy rain here in the UK for the past few days some of which flooded my porch and worse still caused a small land slip outside my workshop...great fun.
Any hows got the board slotted and radius'ed (15.75" - 20" compound low to high) swapped the trussrod to an end wheel unit and then re jigged the LED slots in the back a little.
After a few fails with trying to solder a continuous wire across each - + connection in the same channel (cutting the external sheath between each contact to expose the wire was a PITA) i decided to use a gauge 0.11 string, create x2 channels and then sheath the + connection arm on each LED,much easier to solder,once there all in and working i'll expoxy the whole channel.
Any hows got the board slotted and radius'ed (15.75" - 20" compound low to high) swapped the trussrod to an end wheel unit and then re jigged the LED slots in the back a little.
![50245776221_7bcae72682_b.jpg](https://live.staticflickr.com/65535/50245776221_7bcae72682_b.jpg)
![50245776236_894e5f7cee_b.jpg](https://live.staticflickr.com/65535/50245776236_894e5f7cee_b.jpg)
After a few fails with trying to solder a continuous wire across each - + connection in the same channel (cutting the external sheath between each contact to expose the wire was a PITA) i decided to use a gauge 0.11 string, create x2 channels and then sheath the + connection arm on each LED,much easier to solder,once there all in and working i'll expoxy the whole channel.